Home Companies TTI Fiber Communication Tech. Co., Ltd.

G657A2 Fiber Optic Patch Cord Strong Toughness ISO9001 ISO14001

Active Member

Contact Us

[China]

Address: 6/F, Building C, Qiaotong Yuanling Industrial Park, Shiyan, Bao'an District, Shenzhen, 518108, China

Contact name:Vicky Tan

TTI Fiber Communication Tech. Co., Ltd.

G657A2 Fiber Optic Patch Cord Strong Toughness ISO9001 ISO14001

Country/Region	china
City & Province	shenzhen guangdong
Categories	Packaging Rope

Product Details

G657A2 Fiber Optic Patch Cord Strong Toughness ISO9001 ISO14001

1. Description of invisible fiber optical patch cord:

Invisible optical cable is the abbreviation for transparent tight-buffered optical cable covered with hot melt glue. It is an optical cable composed of G.657.B3 optical fiber, a transparent tight jacket layer, and a layer of hot melt adhesive. Each layer is extruded step by step using an extrusion process, with a nominal outer diameter of 1.2mm. The applicable occasions for invisible optical cables are applications where users do not accept the use of drop-in optical cables to enter the home or to solve the problem of difficult entry for users, especially in old communities and office spaces. The optical fiber used is a G.657.B3 optical fiber with a small bending radius of 5 mm. When laying, there is no need to nail, make brackets, perforate, make pipes, etc., to destroy the original indoor structure, or because of the discontinuity of the laying, the optical cable will sag and fall off and other safety hazards. At the same time, because the optical cable is almost transparent, it will not affect the indoor Beautiful, simple construction method, only need hand-held heating installation tools to complete the laying project.

2. Features:

♦ Super tough, superbend-resistant (n value>30), under small bends, it is stronger and tougher than ordinary optical fibers, and its life span is 10,000 times longer.

♦ Adopt hard leather cladding material, safe, stab-proof, free of
tools & alcohol, 1 minute quick connection, extremely
convenient, continuous optical fiber in the process, high standard
success.

♦ 900 micron invisible optical cable

♦ Stronger, conducive to smaller and lighter multi-core optical cable
design.

♦ Compatible with existing optical fiber network system.

♦ Compliant with ITU-T G.657A2, low bending loss of optical fiber and
insensitive

Material composition: The so-called invisible, that is, hiding and
not revealing the shape, so the outer diameter of this kind of
optical cable must be small, generally not more than 1mm; in
addition, if it is suitable for various styles of decoration, it
must not have color, so this kind of sheath adopts special
Transparent material; so far is not enough, the layout method and
location must also be particulary, such as the wiring route, choose
door frames, skirting lines, cabinet doors, and use
high-performance transparent adhesive to fix the invisible
micro-cable , Instead of using eye-catching fixing methods such as
rivets, so that the user’s actual use of the problem is taken into
account and comprehensive, in order to achieve the invisible
effect. This kind of optical cable is also called invisible
micro-cable.

3. requirement of deploy:

♦ Wire according to the scene and confirm with the user

♦ Make sure that the safe bending radius of the optical cable is
greater than 5MM

♦ Ensure that there is no squeeze or rigid contact during
installation

♦ Avoid light damage during laying, gently move

♦ Before laying, preheat the spreader for 2-3 minutes, wait for the
glue to soften and start laying

♦ Attention should be paid to laying invisible optical cables at
the gate:A: Do not lay on the side of the door opening and closing.
B: Before laying, take a piece of invisible cable to simulate the
laying path with the door closed to prevent pinching. It can be
laid if the line is smooth
C: If the door has better airtightness, other paths and perforation
laying should be considered
 

4. Advantage:

- The layers are tight and not separated, almost transparent;
 
- Special tight sleeve layer, good peelability;
 
- Special hot melt adhesive, strong bonding performance;
 
- The outer surface is smooth, with no visible holes, scars and
other defects;
 
- The small bending radius reaches 5mm, and there is no defect in
laying indoors;
 
- Hand-held laying tools, no complicated wiring methods, convenient
and fast;
 
- Plug-in tools, resource saving, green and environmental
protection.
 
5. Application :
 
1. Telecommunications
2. Local area network
3. Fiber to the home
4. Video transmission
5. Fiber optic sensing
6. Testing instruments
7. CATV
 
6. Parameter:

Company Introduction:

Shenzhen TTI Fiber Communication Tech. Co., Ltd. Is a high-tech enterprise specialized in fiber optic cable assemblies and optical fiber communication devices production, development and sales.

Our company established a set of strict quality assurance system and obtained ISO9001, ISO4001 international quality system certificate.

Our main products are Fiber optic cable, Fiber optic patch cord, fiber optic pigtail, fiber optic adapter, fiber optic attenuator, PLC splitter, fiber optic patch panel and much more FTTH products.

We not only offer OEM service but also help many partners from all over the world to win in the market with professional technical support, excellent product solution, competitive prices, fast delivery and good service.

Through our quality assurance program we give you outstanding quality of fiber optic cable assemblies. Quality has always made TTI Fiber stand out and it is essential to the company success.

Our key objective is to solve our customers and technical challenges by working in partnership to design and manufacture outstanding products. We strive for 100% customer satisfaction.

TTI Fiber provides qualified technical solutions and immediate service response when you need it the most.We not only sell products. We are offering good service and professional support.

Choose TTI, to make your Internet Expedite!