Impact Speed 3.5m-s Rubber Test Digital Display Cantilever Beam Impact Testing Machine

Impact Speed 3.5m-s Rubber Test Digital Display Cantilever Beam Impact Testing Machine

Digital cantilever beam impact testing machine

First, the test machine uses:

The XBL-5.5D cantilever beam impact tester is used to determine the impact toughness of non-metallic materials such as plastics, reinforced nylon, fiberglass, ceramics, cast stone, plastic electrical appliances, and insulating materials. It is a common equipment for quality inspection by scientific research units, universities and non-metallic materials manufacturers. It is a simple structure, convenient operation and high test accuracy. The machine meets the requirements of ISO179---92, GB1043-93 standards. The electronic impact testing machine adopts the circular grating angle measuring technology, which has the characteristics of high precision, good stability and large measuring range. The digital measurement of impact strength, pre-elevation angle, elevation angle, and average value, automatic correction of energy loss, printing test report, etc. Features.

The machine conforms to the international standard ISO180-1992 "Determination of impact strength of plastic-hard material cantilever beam"; national standard GB/T1843-1996 "hard plastic cantilever beam impact test method", machinery industry standard JB/T8761-1998 "plastic Cantilever beam impact tester.

Second, technical specifications:

Cantilever beam impact:

1. Impact speed: 3.5m/s

2, pendulum energy: 1J, 2.75J, 5.5J

3, pendulum angle: 150

4, pendulum center to impact blade distance: 335mm

5, impact blade to the upper plane distance of the jaw: 22mm

6, the blade corner radius: R = 0.8mm

7. The sample type conforms to GB1843-80 and ISO180-82.

8, standard configuration

Our company exclusively uses new materials to make the swing arm, which is stronger than steel and lighter than aluminum.

Other energy 11J, 22J need to be matched