Horizontal Burning Test Equipment Burning Angle 45° 90° Bending Wire Vertical

Burning Angle 45°90° Bending Wire Vertical Horizontal Burning Test Equipment

Vertical horizontal burning test machine JD-3050

Scope of application:

This test equipment is suitable for accessories, parts and components of household appliances for electronic and electrical products, such as: insulated casings for household electric appliances, switch panels, printed circuit boards and insulating materials.

Product features:

The tester combustion box and the main mechanical parts are all painted, beautiful in appearance, resistant to smoke and gas. The key components are imported, the time digital display, the fixture is three-dimensionally adjustable, the control system is automated, independent ventilation, observation and recording are convenient to use, stable and reliable. With gas flow meter, pressure regulation and temperature measuring device.

Compliance with standards:

This combustion tester meets the requirements of UL94, GB5169, GB/T2408-1996 and IEC60695 standards.

Product Overview:

When the product is on fire, it should be ensured that it will not cause fire and spread. This test is to simulate the early situation of fire in the surrounding environment of electronic and electrical products. The fire risk is assessed by simulation technology to judge the fire resistance of plastic (HB level). , V-class, VMT level), the device has accuracy and automatic timing.

Control box description:

1. The burn count counter is used to preset the number of burns, and the red button is the “Reset” button.

2. The burning time is controlled by the time controller. The working time can be set according to the needs. The units are S (second), M (minute), H (hour); if the setting is 00S01 is 0.01 seconds, 15S00 is 15 seconds, 10M00 It is 10 minutes (refer to the time relay manual); the stop time setting is the same as the burn time setting. It can also be used to manually control the burn time.

3. The power switch is the overall power switch of the control box.

4. When the transfer switch is in use, it can be manually or automatically according to actual needs. When it is in the manual state, it must be timed again with the stopwatch. After the test time is reached, press the reset switch to stop the fire. If the automatic state is used, refer to the second. Set the time.

Product configuration:

standard flame contrast fixture, lighting device, air extraction device, gas flow meter, gas U-type pressure gauge and sample holder

Technical Parameters:

1. Flame time 0~99H99H can be set

2. Afterflame time 0~99 H 99 H can be displayed

3. Afterburning time 0～99 H 99H can be displayed

4. Burning angle 45 °, 90 °

5. Nozzle inner diameter: 0.375 inches (9.5 mm).

6. The effective length of the nozzle is 100mm

7. Flame height can be adjusted from 50mm to 175mm according to standard requirements

8. Fire-breathing method: automatic electronic ignition

9. Outer box size: L1000×W600×H1100mm

10. Power supply AC 220V, 50Hz

11. Fuel: Gas (customer-supplied)

12, the technical indicators all meet the UL94 VTM-0, VTM-1, VTM-2 standard requirements