Superisys (Wuhan) Intelligent Technology Co., Ltd |
Verified Suppliers
|
|
IACM-AIO8VI-IOL,IOLINK Slave Station,8 Analog Input/Output Series
Product characteristics
Operating voltage: 10-30VDC
Output function: NPN/PNP, NO/NC Optional
With polarity, overload, short circuit protection
Protection level: IP67
Direct outlet type, connector type
Operating temperature -25°C-+70%C
The use of optimized traditional technology and advanced packaging technology to ensure long-term stability in harsh environments
IO-LINK | model | product description | I/O connection mode | ||||
Class A | IACM-AIO8VI-IOL | IO-LINK slave module 8×AlO port IP67 protection class | M12,5pin hole holder, A code | ||||
Communication and power parameters | |||||||
connection type | 1x M12 A-code; 5- Core hole holder | ||||||
communication protocol | IOLINK | ||||||
Communication rate | 38.4 kbit/s(COM2) | ||||||
minimum cycle time | |55 ms | ||||||
Communication port tightening torque | M12;0.5Nm | ||||||
System supply voltage US | 18…30 VDC(type.24VDC) | ||||||
Power port tightening torque | M12:0.5Nm | ||||||
No load current consumption | ≤80mA | ||||||
Analog input and output parameters | |||||||
Number of inputs and outputs | 8 channel current or voltage | ||||||
Input and output port locations | J1…J8 | ||||||
Current input and output range | 0~20 mA,4~20 mA | ||||||
Voltage input and output range | 0~+5 VDC;0~+10 VDC;+5~+10 VDC | ||||||
diagnose | Contains self-diagnosis | ||||||
Sensor power supply | 24VDC | ||||||
ripple wave | <1% | ||||||
Voltage input and output error | <+0.3% full scale | ||||||
Current input and output errors | <±0.3% full scale | ||||||
resolution ratio | 16 bit | ||||||
Measurement display and output format | 16 bit unsigned integer | ||||||
factory settings | 0~+10 VDC input | ||||||
Module indicator light | |||||||
IOLINK protocol | |||||||
PWR | Green: the module power supply is normal | ||||||
Out: The module does not have power supply | |||||||
Al | Extinguished (LEDA,LEDB) : The port is closed | ||||||
(J1.….J8) | Green (LEDA) : channel signal is normal, input/output signal is within valid range | ||||||
Red (LEDA) : input/output signals are not in valid range | |||||||
Red (LEDA,LEDB) : 1 and 3 pin short circuit or port break | |||||||
IO-LINK | Green: communication is not connected | ||||||
Green flash: communication is normal | |||||||
Green flash: communication is normal | |||||||
I/O port pin definition | |||||||
port | Definition of stitch | Address distribution | |||||
M12 | |||||||
A-code mother end | |||||||
underlying parameter | |||||||
dimension figure | shell material | PA6+GF | |||||
shell color | black | ||||||
level of protection | IP67, epoxy full potting | ||||||
boundary dimension | 155mm x53mm x28.7mm | ||||||
weight | 217g | ||||||
operating temperature | -25°C...70°C | ||||||
Storage/transport temperature | 40°C...85°C | ||||||
operation humidity | 5%...95% | ||||||
Store/transport humidity | 5%...95% | ||||||
Operating atmospheric pressure | 80KPa...106KPa | ||||||
Store/transport atmospheric pressure | 80KPa...106KPa | ||||||
I/O port tightening torque | M12:0.5Nm | ||||||
application environment | In accordance with EN-61131 | ||||||
application environment | Comply with IEC60068-2 | ||||||
impact test | Comply with IEC60068-27 | ||||||
Free drop test | Comply with IEC60068-32 | ||||||
Electromagnetic compatibility (EMC) | Comply with IEC61000-4-2,-3,-4 | ||||||
authentication | CE,RoHS | ||||||
Mounting hole specification | ∅4.3mm x 4 |