Active Member
|
[China]
Address: 1604#, Yangming Sicence & Technology Industry Center, No.855 Nanhu Avenue,Wuxi city, Jiangsu, China
Contact name:Alfred
Jiangsu Lebron Machinery Technology Co., Ltd. |
|
|
Full Automatic Cable Tray Roll Forming Machine Hydraulic Cut Servo Guiding Device
1. Main Technical Parameter
| NO | Item | Para | Memo | |
| 1 | Suitable Material | Type | Hot rolled steel coil Galvanized steel coil | |
| Thickness | 1.6mm -2.6mm | |||
| Yield Strength | 300MPa | |||
| Coil Width | 216mm-816mm | |||
| 2 | Producing Speed | About 3.5 m/min | Including punching time and cutting time | |
| 3 | Motor power of leveling device | 5.5 KW | ||
| 4 | Motor power of servo feeding device | 2.9 KW | ||
| 5 | Motor power of 200 tons punching device | 18.5 KW | ||
| 7 | Main motor power | 15KW | ||
| 8 | Roller change motor power | 0.75KW*2+0.55KW*2 | ||
| 9 | Hydraulic station power of Decoiler | 3KW | ||
| 10 | Hydraulic station power of Cutter | 5.5KW | ||
| 11 | Total power | 53KW | ||
| 12 | Power | AC415V,50Hz,3 Phase | ||
| 13 | Dimension (L×W×H, m) | About 25×3.5×3.5 | ||
2. Advantage:
- As the same as the machine in picture, our metal stud machine can produce stud profile and truck profile,
- those profile are for partition wall, also call drywall. For this machine,
- the profile size is C&U 52*32mm, and there are also embossing at the two sides.
3. Our Services
Terms of Payment: 30% of the total contract value paid by T/T as down payment, the rest 70% of the total contract value to be paid by T/T after inspection by buyer in seller’s factory while before delivery.
Delivery: 30 working days after receipt of advance payment
Service: we send technician to your country to fix the machine.The buyer should bear all the cost including: visa, Round trip tickets and suitable accommodation, also buyer should pay salary 100USD/day.
Warranty: 12 months limited warranty
During warranty: parts are free but buyer pay for the shipping fee.
4. Main Technical Details
1. Suitable Plate Material:
1.1 Material– thickness:0.8-1.5mm
1.2 Raw material: Galvanized steel and black steel sheets
2. Working Speed: 12meters / min
3. Forming Steps: 20 stations
4. Material of Roller: Gcr15, Quench HRC58-62 Plated Chrome
5. Material of Shaft: 45# Advanced Steel (Diameter: *90mm), thermal refining
6. Driven system: chain drive, shafts diameter 100mm
7. Main Power with reducer: 22KW WH Chinese Famous
8. Cutting: Hydraulic Cutting Cr12mov
9. Material of Cutting Knife: Cr12Mov, Quench HRC58-62
10. Hydraulic Station Power: 11KW Wuxi Wanshen Famous Chinese Brand
11. The whole machine is controlled by industry computer-PLC.
12 PLC--Panasonic, Japan
13 Touch Screen—Beijing Kunlun Encoder--Omron, Japan
14. Electric parts--Schneider
15. Adjust the height by the motors and the rails, controlled by the PLC
5. Packaging & Shipping
Packaging :
1. Tighten to container with steel wire rope and welded machine with container by angel iron
2. Main forming machine and un-coiler is naked (If you need we can also packed with water-proof plastic)
3. PLC contral system and motor pump are packed with water proof paper
Shipping :
1. One 20" container
2. One 40"container
6. Picture
