Active Member
|
[China]
Address: Room 711, 7F, Unit 2, 1st Building, 666 Fengxi Avenue North Section, Wenjiang District, Chengdu
Contact name:Robin Liao
Starlight Industry Co.,Ltd. |
|
|
450kW Biogas Generator with Soundproof Canopy
The 450kW biogas generator with soundproof canopy bring our clients for exellent experiences because of its reliability, efficiency, safety and comfort.
Gas Engine - Deutz BF12M For 450kW BioGas Generator with Soundproof Canopy
Deutz BF12M natural gas engine is selected for the 450kW biogas generator with soundproof canopy.
The gas engine is deeply developed in fuel control systems to improve its electric efficiency, reliability and fuel adaptivity for certain working conditions. The development also give consideration for dynamic responsiveness, fuel economy, reliability and safety.
Proven gas engine is controlled by imported gas close-loop lean-burn control system which includes latest control system, single cylinder independent ignition system, electrical speed regulating system, fuel close-loop control system, environment self-adaptation system and self diagnose and protection system. All these systems will ensure accurate and reliable control of gas engine and ensure its economic, dynamic and environmental performances. The systems are also optimized by our company to achieve high reliability and efficiency.
Alternator
Mecc Alte ECO40 brushless synchronous alternating-current generator with strengthen moving components is selected to improve the alternators resistance to load impact and interference and to ensure its long term reliable and stable operation.
Generator Set Control System
Generator control system is ComAp intelligent generator control system which realizes automatic start, speed up, switching on, parallel, load allocation, brake separation, cooling and halt. Remote control and monitoring system is also available.
Gas Generator Technical Parameters
Table 1 Technical Parameters for 450kW Biogas Generator
| S.N | Item | Parameters |
| 1 | Generator Set | 450 Biogas Generator - Open Type |
| 1.1 | Generator Model | ED-500NG-4A |
| 1.2 | Rated Power | 450kW |
| 1.3 | Rated Current | 902A |
| 1.4 | Rated Voltage | 230/400V |
| 1.5 | Rated Frequency | 50Hz |
| 1.6 | Startup Mode | DC24V Electrical Start |
| 1.7 | Speed Regulation | Electrical Regulation |
| 1.8 | Fuel Control | Lean-burn, Close-loop Control |
| 1.9 | Ignition | Electrical Control Single Cylinder In-dependant High Energy Ignition |
| 1.10 | Generator Set Control | One-Button Startup/Stop |
| 1.11 | Lubricant Consumption | ≤0.35g/kWh |
| 1.12 | Efficiency | ≥3.5kWh/Nm³(60% Load and above) |
| 1.13 | Dimensions | 3800*1800*2000mm |
| 1.14 | Net Weight | 5600kg |
| 2 | Engine | |
| 2.1 | Brand | HuaChai/Deutz |
| 2.2 | Model | ECO40-1.5L4B |
| 2.3 | Displacement | 24L |
| 2.4 | Air Intake | Turbocharge, Forced Inter-cooler, Four-valve Structure |
| 2.5 | Rated rpm | 1500r/min |
| 2.6 | Cooling | Forced Water Cooling |
| 2.7 | Lubrication | Forced Splash Lubrication |
| 2.8 | Lubricant Temperature | ≤108℃ |
| 3 | Alternator | |
| 3.1 | Brand | Mecc alte |
| 3.2 | Model | ECO40-1.5L4B |
| 3.3 | Power Factor | 0.8(Lag) |
| 3.4 | Generating Efficiency | 93.7% |
| 3.5 | Alternator Capacity | 625kVA |
| 3.6 | Phase | 3-phase 4-wire |
| 3.7 | Insulation Grade | H |
| 3.8 | Protection Grade | IP23 |
| 4 | Generator Set Control System | |
| 4.1 | Brand | ComAp |
| 4.2 | Model | MF25 |
| 4.3 | Functions | One-button startup/stop, data display, Recording, Protection and Monitoring etc. |
| 4.4 | Displayer | Rpm/lubricant pressure/water temperature/ running hours/ current/ voltage/ Frequency/ active power/ reactive power/ load distribution etc |
| 4.5 | Protection Functions | Alarming and automatic control for high water temperature, low lubricant pressure, over speed, overcurrent, AC/DC voltage low/high, short circuit etc |
1. The data is based on heat value on or above 35.88MJ/Nm3 natural gas which conform to ISO8528/1, ISO3046/1 and BS5514/1 standards. 2. Technical data acquired under standard conditions: barometric pressure: 100kPa,Ambient temperature: 25°C, relative humidity: 30%. 3. Under standard conditions the data conforms to DIN standard ISO 3046/1evaluation.Rated natural gas consumption tolerance is within ±5%. 4. Power factor is 0.8 and above. 5. Fume Nox contends ≤500ppm； | ||
