|
[China]
Trade Verify
Contact name:
Beijing Silk Road Enterprise Management Services Co.,LTD |
|
Verified Suppliers
|
|
|
FR301 THRU FR307 FAST RECOVERY RECTIFIERS Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes
The plastic package carries Underwriters Laboratory |
| Flammability Classification 94V-0 |
| Fast switching for high efficiency |
| Low reverse leakage |
| High forward surge current capability |
| High temperature soldering guaranteed: |
| 250 C/10 seconds,0.375”(9.5mm) lead length, |
| 5 lbs. (2.3kg) tension |
MECHANICAL DATA
Case: JEDEC DO-201AD molded plastic body
Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight:0.04 ounce, 1.10 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. | |||||||||
| MDD Catalog Number | SYMBOLS | FR 301 | FR 302 | FR 303 | FR 304 | FR 305 | FR 306 | FR 307 | UNITS |
| Maximum repetitive peak reverse voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | VOLTS |
| Maximum RMS voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | VOLTS |
| Maximum DC blocking voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | VOLTS |
Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=75 C | I(AV) | 3.0 | Amps | ||||||
Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) |
IFSM |
200.0 |
Amps | ||||||
| Maximum instantaneous forward voltage at 3.0A | VF | 1.3 | Volts | ||||||
Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C | IR | 5.0 100.0 | mA | ||||||
| Maximum reverse recovery time (NOTE 1) | trr | 150 | 250 | 500 | ns | ||||
| Typical junction capacitance (NOTE 2) | CJ | 60.0 | pF | ||||||
| Typical thermal resistance (NOTE 3) | RqJA | 20.0 | C/W | ||||||
| Operating junction and storage temperature range | TJ,TSTG | -65 to +150 | C | ||||||
Note:
1. Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A
2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3. Thermal resistance from junction to ambient at 0.375”(9.5mm)lead length,P.C.B. mounted
RATINGS AND CHARACTERISTIC CURVES FR301 THRU FR307
