Fingertip Reusable Spo2 Sensor Multifunctional Soft TPU Material

Compatible Philip-s Adult Spo2 Sensor 12 Pin Medical TPU Material Fingertip Clip

OEM Part Number Cross References:

Compatibility:

To ensure proper use of the SpO2 sensor and its cable, please follow these guidelines:
Cleaning: Clean the sensor and cable before each patient use. Follow the recommended cleaning procedures provided by the manufacturer or refer to the product documentation.
Sensor Placement: Place the sensor on the index finger, making sure the finger is fully inserted and the tip of the finger rests against the finger stop inside the sensor. Alternatively, you can use small-sized thumb, middle and ring fingers, the little finger, or the big toe as alternate sites. Ensure that the fingernail is located under the finger stop on the SpO2 sensor clamp.
Avoid Interference: Do not place the sensor on the same arm as the blood pressure cuff, arterial catheter, or intravascular line. Remove all nail polish as it can affect accuracy. Avoid using the sensor inside or near an MRI, and keep intense light sources away from the sensor.
Changing Measurement Site: For long-term use, change the measurement site every 4 hours to maintain the integrity of the patient's skin.
Restless Patients: In the case of restless patients or excessive motion, consider using Med Accessories Soft tip, wrap, or multi-site sensor to help secure the sensor to the patient.

Equipment:
Connect the sensor cable to the appropriate equipment (pulse oximeter).
Turn on the equipment and ensure its correct operation by consulting the monitor's operation instructions.
To ensure proper operation of the monitor, periodically connect and disconnect the sensor cable from the monitor cable.
Systematically check the sensor and cable at least once a month (or more frequently depending on usage) for appearance, insulators, connector contact pins, and overall mechanical integrity.
Do not use or discard any sensor that shows mechanical or electrical flaws.
Operating Conditions:
Ambient temperature: 0°C to +40°C
Relative humidity: 0% to 80%
Atmospheric pressure: 860 to 1060 HPa

Here are the features of the product:
Brand new: The product is brand new, ensuring its quality and reliability.
OEM available: The product offers the option for Original Equipment Manufacturer (OEM) customization, allowing you to tailor it to your specific requirements and branding.
Quality 100% assured: The product undergoes rigorous quality assurance processes to ensure its performance and durability.
Superior flexibility and durability: The cable is designed to provide superior flexibility and durability, allowing for reliable and long-lasting use. It is built to withstand bending and twisting without compromising its functionality.
Aluminum foils shielding: The cable is equipped with aluminum foils shielding, which helps to protect against interference and signal degradation, ensuring accurate and reliable data transmission.
Direct shipping: The product is available for direct shipping, providing convenient and efficient delivery to your desired location.
UL and RoHS compliance: The materials used in the connector and cable comply with UL (Underwriters Laboratories) and RoHS (Restriction of Hazardous Substances) standards, ensuring safety and environmental friendliness.
Technology process: The manufacturing process involves cutting, welding, molding, assembly, and testing to ensure the highest quality standards are met.
Customizable and drawings accepted: The product is customizable, allowing you to tailor it according to your specific requirements. Drawings and specifications can be accepted to ensure the product meets your exact needs.
OEM/ODM available: The product offers Original Equipment Manufacturing (OEM) and Original Design Manufacturing (ODM) options, allowing you to customize and brand the product to align with your specific requirements.