|
[China]
Trade Verify
Address: No.210,211,212,213,214,Building 1,No.12 Industry Western Road,SongShanHu,Dongguan,Guangdong,China.523808
Contact name:Carina
Med Accessories Technology Dongguan Co., Ltd. |
|
Verified Suppliers
|
|
|
Medical consumables Compatible reusable M-o adult soft spo2 sensor
Compatibility:
Manufacturer | Model |
|---|---|
Bitmos | sat 800, sat 801, sat 805, sat 816, satPuls |
CAS Med | 511 |
Cardio Aid | 200 |
Covidien > Nellcor | N-3000, N-390, N-395, N-550, N-560, N-595, N-600, N-6000, N-600x, NPB-290, NPB-295, Symphony N-3000 |
Criticare | 506DNV3, 506DNVP3, 506LNV3, 506LNVP3, 506NV3, 506NVP3 |
DRE | Waveline |
Datex Ohmeda | AS/3, CS/3, Cardiocap/5, S/5, enGuard CM5 |
Digicare | LW600 |
Fukuda Denshi | Dynascope DS-7100 |
GE Healthcare > Critikon > Dinamap | Carescape B650, Carescape V100, Dinamap ProCare with M Pro 1000, E-NSAT, M-NSAT Modules, Pro 1000, Pro 1000 V3, Pro 200, Pro 300, Pro 300V2, Pro 400, Pro Series, Pro Series V2, ProCare, ProCare 200, ProCare 300, ProCare 400, ProCare Ausculatory 400, ProSeries V2, V300 |
Huntleigh | All |
Invivo | Escort II OPT30 Prism, MDE Escort Prism, T8 |
M | All |
Mediana | YM6000 |
Midmark > Cardell | 9403, 9500HD |
Mindray > Datascope | Accutor V, Accutorr Plus, Accutorr Plus (Nellcor), Accutorr V, Duo, EPM4, Passport 2, Passport 2LT, Passport V, Passport XG, Spectrum, Spectrum OR, Trio, V12, V21 |
Nihon Kohden | BSM-2300, BSM-2304A, BSM-4100, BSM-4104A, BSM-4114A, BSM-5100 |
Omron > Colin | BP-306, BP-508, BP-808, BP-88, BP-88S, BP-S510, Press-Mate, T105NXM |
Oridion | Capnostream 20 |
Respironics | Alice 5 |
Stryker > Medtronic > Physio Control | Lifepak 11, Lifepak 12, Lifepak 15, Lifepak 20, Lifepak 20E |
Welch Allyn | 42NT0-E1 LXi, 45NE0-E1 LX, 53STP, Propaq CS, Spot Vital Signs 42MTB-E1, Spot Vital Signs 42NTB-E1, Spot Vital Signs lXi |
Zoll | E Series, M Series, R Series |
Cleaning the equipment:
To clean the sensor and its connecting cable, follow these steps:
Use warm soapy water: Clean the sensor and cable by gently washing them with warm, soapy water. Ensure that the water is not too hot, and use a mild soap or detergent.
Use a soft cloth with soapy water or 70% isopropyl alcohol: Moisten a soft cloth with either soapy water or 70% isopropyl alcohol. Gently wipe the probe and cable with the cloth, taking care not to damage the surface of the visual indicator and the detector.
Avoid abrasive agents or chemical products: Do not use any abrasive agents or chemical products except for 70% isopropyl alcohol. These can potentially damage the sensor and its components.
Dry the probe and cable thoroughly: After cleaning, allow the probe and cable to dry completely before using them again. Ensure that there is no moisture remaining, as this can affect the proper functioning of the equipment.
Avoid irradiation, autoclaving, soaking, or immersing the probe: Do not subject the probe to irradiation, autoclaving, soaking, or immersion in any type of solution. These actions can damage the probe and compromise its performance.
Keep the probe clean and dry: It is important to maintain the cleanliness and dryness of the probe during use. Regularly check for any signs of contamination or damage and clean as necessary.
Average life expectancy: The average life expectancy of a SpO2 sensor is typically more than a year when used under the conditions recommended in the operating instructions. Following the proper cleaning and maintenance guidelines can help prolong the lifespan of the sensor.
By following these cleaning instructions and guidelines, you can ensure the cleanliness, functionality, and longevity of the SpO2 sensor and its connecting cable.
