|
[China]
Trade Verify
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu District,Shenzhen,518001,China
Contact name:Mayne
Wisdomlong Technology CO.，LTD |
|
Verified Suppliers
|
|
|
GE IC693APU305 PLCs made 12 points of positive logic inputs
delivering 5 VDC or 10 to 30 VDC
Product information GE IC693APU305 :
The IC693APU305 module consists of 12 points of positive logic
inputs delivering an input voltage of either 5 VDC or 10 to 30 VDC.
Moreover, it has 8 positive logic outputs; 4 outputs with a current
rating of 1 Amp and 4 configurable outputs with a rating of 0.5
Amps. All outputs are protected from damaged by a replaceable fuse.
A dedicated processor provides 500 µs I/O update. There is a
terminal board for connection during field wiring. The module comes
with LED indicators that indicate the status of outputs from 1 to 4
and module OK and Configured OK status. The module performs
internal module diagnostics and has 32 range comparators (outputs
returned in %I and %AI data). There are 4 strobe data registers
with 2 indicating input pulse length or input spacing in ms.
Outputs are normally used to drive indicating light, relays,
solenoids etc. Power for operation of the module’s circuit registry
comes from the 5 VDC bus located on the baseplate backplane. Power
sources for the input and output devices should be supplied by the
user or the +24 VDC isolated output the 90-series supply. All
module’s configuration parameters are downloaded from the PLC to
the I/O processor after passing the internal diagnostics test.
Upon successful completion of the configuration process, the CONFIG OK LED will come ON. To make any alterations to the configuration parameters, a Logic master 90-30 programming software or a handheld programmer is used. Operation of the I/O processor is monitored by a watch dog time circuit. If the timer detects a module problem, it’ll force all outputs OFF and turn off the MODULE OK LED.
Series 90 -30 PLCs
GE Intelligent Platforms’ Series 90*-30 PLCs is a family of controllers, I/O systems and specialty modules designed to meet the demand for versatile industrial solutions — helping businesses gain a sustainable advantage. With its single overall control architecture, the Series 90-30 has been the PLC of record in over 200,000 applications such as highspeed packaging, material handling, complex motion control, water treatment, continuous emissions monitoring, mining, food processing, elevator control, injection molding and many more.
Module Features
• Up to 12 positive logic (source) inputs with input voltage range selection of either 5 VDC (TTL) or 10 to 30 VDC (non-TTL).
• Up to eight positive logic (source) outputs: four outputs with 1 amp rating and four configurable outputs with 0.5 amp rating
• Outputs protected by replaceable fuse (one fuse common to all outputs)
• Dedicated processor provides 500 ïs I / O update
• Counts per Timebase register for input rate measurement
• Total Counts register (32-bit) accumulates total counts received by module
• Four Strobe data registers for input position capture
• Two Timer data registers for indicating input pulse length or input spacing in milliseconds
Another module:
| IC694MDL230 | 120 VAC Isolated Input (8 Points) |
| IC694MDL231 | 240 VAC Isolated Input (8 Points) |
| IC694MDL240 | 120 VAC Input (16 Points) |
| IC694MDL241 | 24 VAC/VDC Input (16 Points) |
| IC694MDL250 | 120 VAC Isolated Input (16 Points) |
| IC694MDL260 | 120 VAC Input (32 Points)** |
| IC694MDL632 | 125 VDC Input (8 Points) |
| IC694MDL634 | 24 VDC Input, Neg/Pos Logic (8 Points) |
| IC694MDL645 | 24 VDC Input, Neg/Pos Logic (16 Points) |
| IC694MDL646 | 24 VDC Input, Neg/Pos Logic, 1 msec Filter (16 Points) |
| IC694MDL654 | 5/12 VDC (TTL) Input, Neg/Pos Logic, (32 Points) |
| IC694MDL655 | 24 VDC Input, Neg/Pos Logic, 1 ms, (32 Points) |
| IC694MDL660 | 24 VDC Input (32 Points)** |
| IC694ACC300 | Input Simulator Module (8 Points) |
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
