Force sensor torque transducer |
|
Reaction torque transducer 50kNm flange type torque sensor 440 klbf-in
Flange type reaction torque sensor FT03 is made of high stiffness
alloy steel based on strain gauge technology,flange-to-flange
torque transducer FT03 delivers mV/V signal from wheatstone bridge
bonded on a specially machined body,in-house calibration
certificate in both clockwise and anticlockwise will be provided to
guarantee the sensor performance,mating connector and mating cable
is included.Flange to flange design makes it easy to mount FT03 to
existing strutures.Torque load cell FT03 is available in a very
wide measuring range from 200NM up to 100kNm,you may find FT03
suitable for applications such as motor torque measurement,test bench applications,screw driver
calibration,fatigue testing,twist measurement,motor
dynamometers,actuator test as so on.Besides the standard
specifications,Forsentek is also capable of and willing to provide
custom design service to meet requirements of different
applications.
Specifications
Capacity | 20kNM 30kNM 40kNM 50kNM |
Rated output | 1.5mV/V |
Excitation | 3-15V |
Zero balance | ±2% R.O. |
Nonlinearity | <0.5% R.O. |
Hysteresis | <0.5% R.O. |
Nonrepeatability | <0.2% R.O. |
Creep(10min) | ±0.1% R.O. |
Safe overload | 150% F.S. |
Ultimate overload | 200% F.S. |
Compensated temperature | -10...+40oC |
Operating temperature | -20...+60oC |
Temperature shift zero | ±0.02% R.O./oC |
Temperature shift span | ±0.02% R.O./oC |
Input resistance | 1020±100 ohms |
Output resistance | 1020±10 ohms |
Insulation resistance | >5000M ohms |
Ingress protection | IP62 |
Material of element | Alloy steel |
Cable | Ø5.5*3000mm |
Wiring code | Red--E+ Green--E- Yellown--S+ White--S- |
Flange to flange reaction torque transducer 20kNm 30kNm 40kNm 50kNm
Dimensions(unit in milimeter)