Home Companies Force sensor torque transducer

High accuracy Load cell sensor 3kg 6kg 10kg 20kg 30kg 40kg Weighing Transducer

Active Member

Contact Us

[China]

Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000

Contact name:Tarik Lu

Force sensor torque transducer

High accuracy Load cell sensor 3kg 6kg 10kg 20kg 30kg 40kg Weighing Transducer

Country/Region	china
City & Province	shenzhen guangdong
Categories	Rubber Product Making Machinery Parts

Product Details

High accuracy Load cell sensor 3kg 6kg 10kg 20kg 30kg 40kg Weighing Transducer

load cell sensor

Features

Aluminum construction,4-wire connection
Strain gauge technology,temperature compensated,high accuracy
1000ohms resistance,low heat emission compared to normal 350ohms version
Single point load cell,easy to install
Off-center error compensated for 250*350(mm) platform
Competitive price
Widely used for price computing scales,counting scales,bench scales.etc.

Dimensions
load cell sensor FNG

Specifications

Rated capacity	3kg 6kg 10kg 15kg 20kg 30kg 40kg
Rated output	2.0±10%mV/V
Excitation	3-15V
Zero balance	±0.1mV/V
Non-linearity	±0.02% R.O.
Hysteresis	±0.02% R.O.
Non-repeatability	±0.015% R.O.
Creep(30min)	±0.03% R.O.
Safe overload	150% F.S.
Ultimate overload	200% F.S.
Compensated temperature	-10...+40^oC
Operating temperature	-20...+60^oC
Temperature shift zero	±0.05% R.O./10^oC
Temperature shift span	±0.03% R.O./10^oC
Input resistance	1130±20 ohms
Output resistance	1000±3 ohms
Insulation resistance	>2000M ohms
Ingress protection	IP65
Material of element	Aluminum alloy
Cable	Ø4*400mm(Longer cable available)
Wiring code	Red--Exc+ Black--Exc- Green--Sig+ White--Sig-

Load cell sensor weight measurement transducer
weight measurement sensor

A load cell sensor is a transducer that converts mechanical force into electrical signal which is proportional to the weight(or force) being applied.The measured load or force causes deformation of the measuring element(elastic body),the bonded strain gauge deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the load cell.
load cell wiring schematic

The output range of a strain gauge load cell is normally between 0-30mV(-30~30mV for bidirectional sensor),and signal amplification is necessary for most applications,a load cell signal conditioner can be used to get ±5V,±10V,0-5V,0-10V or 4-20mA signal for easy data process afterwards

Digital indicator can be used to display the measured value,load cell display FPT is CE certified with 24 bit high accuracy ADC,sampling speed up to 960Hz,supports RS485 or RS232 communication port,can also output 0-5V,0-10V,0-20mV or 4-20mA amplified signal.
load indicator