Active Member
|
[China]
Address: 2# Jinlong Rd. Baolong Industrial Zone, Longgang Dist. Shenzhen China 518000
Contact name:Tarik Lu
Force sensor torque transducer |
|
|
Reaction type torque transducer non-rotating torque measurement
Features
Dimensions
Specifications
| Rated capacity | 0.5NM 1NM 2NM 5NM 10NM 20NM 30NM 50NM 100NM |
| Rated output | 1.0-2.0mV/V |
| Excitation | 5-15V |
| Zero balance | ±2% R.O. |
| Nonlinearity | ±0.15% R.O. |
| Hysteresis | ±0.15% R.O. |
| Nonrepeatability | ±0.05% R.O. |
| Creep(30min) | ±0.05% R.O. |
| Safe overload | 120% F.S. |
| Ultimate overload | 150% F.S. |
| Compensated temp. | -10...+40oC |
| Operating temp. | -20...+60oC |
| Temp. shift zero | ±0.01% R.O./oC |
| Temp. shift span | ±0.01% R.O./oC |
| Input resistance | 350±30 ohms |
| Output resistance | 350±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP50 |
| Material of element | Aluminum/alloy steel |
| Cable | Ø5*3000mm(Longer cable available) |
| Wiring code | Red--Exc+ Black--Exc- |
A torque sensor is a transducer that converts a torsional mechanial input into an electrical output signal. Torque transducer can be devided into two types:rotary torque sensor and reaction torque sensor depending on the torque it's going to measure.Rotary torque transducer is able to measure both rotating torque and non-rotating torque while reaction torque sensor can only measure non-rotating torque or torque with small rotating angle.
Reaction type torque sensor FT02 is designed to measure static torque which is also known as reaction torque.The output range of FT02 is normally between -20~20mV which is proportional to applied torque, signal conditioner can be used to get ±5V,±10V,0-5V,0-10V or 4-20mA output for easy data acquisition.
Torque meter can be used to display the torque value.Indicator FPT is integrated with high accuracy 24-bit ADC,up to 960Hz sampling speed make it suitable for both static measurement and dynamic measurement.FPT also supports RS485/RS232 communication interface and amplified signal output 0-10V/0-5V/4-20mA which is proportional to the measured value.
