Force sensor torque transducer |
|
Features
Dimensions
Specifications
Rated capacity | 20kg 60kg 100kg 150kg 200kg 300kg |
Rated output | 2.0mV/V |
Excitation | 3-15V |
Zero balance | ±0.1mV/V |
Nonlinearity | ±0.015% of R.O. |
Hysteresis | ±0.01% of R.O. |
Nonrepeatability | ±0.01% of R.O. |
Creep(30min) | ±0.02% of R.O. |
Safe overload | 150% of F.S. |
Ultimate overload | 200% of F.S. |
Compensated temperature | -10...+40oC |
Operating temperature | -20...+60oC |
Temperature shift zero | ±0.02% of F.S./10oC |
Temperature shift span | ±0.02% of F.S./10oC |
Input resistance | 405±10 ohms |
Output resistance | 350±5 ohms |
Insulation resistance | >5000M ohms |
Ingress protection | IP65 |
Material of element | Aluminum alloy |
Cable | Ø4*1500mm 4-core shielded |
Wiring code | Red--EXC+ Black--EXC- Green--SIG+ White--SIG- |
Strain gauge load cell weight measurement sensor
A load cell is a transducer that converts mechanical force into electrical signal whose magnitude is proportional to the weight(or force) being applied.The measured load or force causes deformation of the measuring element(elastic body),the bonded strain gauge deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the load cell.
The output range of a standard strain gauge load cell is normally between 0-30mV(-30~30mV for bidirectional sensor),and signal amplification is needed for most applications,a load cell transdmitter can be used to get ±5V,±10V,0-5V,0-10V or 4-20mA signal.
Digital indicator can be used to display the measured value,load cell display FPT is CE certified with 24 bit high accuracy ADC,sampling speed up to 960Hz,supports RS485 or RS232 communication port,can also output 0-5V,0-10V,0-20mV or 4-20mA amplified signal.