Jufu Water Technology Co., Ltd |
|
Water Desalination Machine 18TPH Reverse Osmosis System Filtration Plant
The reverse osmosis system is a high-pressure operation equipment. In order to protect the equipment and instruments and safety, the open state of the valve should be confirmed and adjusted in strict accordance with the operating procedure before operation. The specific operation is as follows:
1. Completely open the inlet valve of the security filter and the inlet valve of the high pressure pump
2, open the high pressure pump water valve a circle
3. Open the RO inlet valve for one turn
4. Rotate the needle valve on the thick water pipe three and a half times
5, completely open the water outlet valve and concentrated water outlet valve
6. Close all sampling valves and cleaning valves
7. Open all pressure display valves to half-open state
Working Principle of RO Water Treatment System
The reverse osmosis water treatment system is a reverse osmosis
equipment that squeezes the water molecules on one side of the
reverse osmosis membrane to the other side through a high-pressure
pump, then we can obtain pure water on the other side, which is the
most basic reverse osmosis technology. principle.
Technical Specifications of RO Water Treatment System:
Model | JFRO-18T |
Host Size | 4500x1000x1700mm (can be customized) |
Power | 18.5KW |
Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
Operating Pressure | 1.2~1.5MPa |
Recovery Rate | 67% |
Designed Water Inlet | 30t/h |
Outlet Flow | 20t/h |
Desalination Rate | ≥99.5% |
RO Frame | SUS304 |
Membrane Size | 8040 |
Membrane Elements | DOW /Hydranautics/Troy/ Vontron (Optional) |
Number of Membranes | 20 |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
High Pressure Pump | CNP/NYP/GRUNDFOS (Optional) |
Tank Material | SS/FRP(Optional) |
Control Valve | Manual/Automatic |
Control Valve Brand | FLECK/RUNXIN |
Membrane Housing | FRP |
Number of Membrane housing | 5 |
Pipe Material | U-PVC/ Stainless steel (Optional) |
RO Water Treatment System Process Flow:
Raw water pump - sand filter - carbon filter - cartridge filter -
high pressure pump -RO membrane host machine -RO cleaning system
RO Water Treatment System Concentrated Water Treatment System Features:
(1) Fast reaction rate, short processing time.
(2) a wide range of application, containing azo, carbon double
bond, nitro, halogenated structure and other difficult to degrade
organic matter has a good treatment effect.
(3) Simple process, long service life, low operating cost,
convenient operation and maintenance, stable treatment effect.
(4) High chroma and COD removal rate, improve the biodegradability
of RO concentrated water.
Reverse osmosis water treatment process is basically a physical desalting method, which has many advantages that traditional water treatment methods do not have: A. Reverse osmosis is a physical method without phase transition to desalting and purifying saline water supply at room temperature. The desalting rate of the ultra-thin composite membrane element can reach more than 99.5%, and can remove colloid, organic matter, bacteria, virus and so on in the water at the same time. b. Water treatment only relies on water pressure as a driving force, and its energy consumption is the lowest among many treatment methods. c, without a large number of chemical agents and acid, alkali regeneration treatment, no chemical waste liquid discharge, no environmental pollution. d, reverse osmosis device can be continuous operation of water, simple system, easy to operate, product water quality is stable. E. The reverse osmosis device has a high degree of automation, and the workload of operation maintenance and equipment maintenance is very small. f. The equipment occupies a small area and requires a small space. g. Suitable for a wide range of raw water quality, not only for brackish water, sea water and sewage treatment, but also for fresh water treatment with low salt content.
Photos and details of RO Water Treatment System
FAQ:
1. What is the design water yield of ro membrane element? (except
anti-pollution membrane and seawater desalination membrane)
Model 4040 is designed by 0.25m3/h
Model 8040 is designed by 1-1.2m3/h
2. What is the material of mechanical filter?
Carbon steel, stainless steel, fiberglass
3. what are the multi-way control valves?
Manual control valve, automatic control valve
Multi - way control valve is divided into: filter valve and
softening valve
Automatic control valve is divided into: time type and flow type.
Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean
source, etc.