|
[China]
Trade Verify
Address: Rm 1503, A Bldg, Southen International Plaza,Yitian Rd,Futian Dist,Shenzhen,518017,China.
Contact name:John
JINPAT Electronics Co., Ltd |
|
Verified Suppliers
|
|
|
9X2A 220VAC Through Bore Electrical Slip Ring Multiple Slip Ring Models
through-bore slip rings (the center hole can pass through the drive shaft, gas-liquid passage; it can also integrate high frequency, fiber, encoder, waveguide, gas and liquid and other joints). The use of advanced fiber brush ensures reliable contact under extremely low friction. The center hole is available from 0 to 1000mm. The current is from mA to 5000 amps. The voltage can be up to 10000 volts, which can fully meet different needs of transmission.
LPT012A-0902 Realizing the 360° unrestricted continuous rotation of the swing arm not only solves the problem of twisting and twisting of the wire during rotation, but also increases the contact area by setting multiple contact surfaces and improves the stability. The utility model has the advantages of simple structure, convenient maintenance, safety, reliability, stability and high efficiency.
| Electronic & Electruc | Mechanical | |||
| Circuits | Total | 9 CKT | Working Speed | 0~300rpm |
| Detail | 9X2A | Inner Diameter | / | |
| Rating Voltage | 220VAC | Contact Material | Precious Metal | |
| Dielectric Strength | 500VAC@50Hz | Housing Material | Aluminum Alloy | |
| Insulation Resistance | ≥300MΩ@300VDC | Lead Wire Length | Stator:250mm Rotor:80mm | |
| Environment | Remarks | |||
| Working Temperature | -20°C~+60°C | Application | / | |
| Working Humidity | ≤60%RH | Other | / | |
| IP | IP54 | Note:"P" stands dor power, "S" stands for signal | ||
Product outline drawing
Feature Of Through Hole Slip Ring
