Active Member
|
[China]
Address: High-technology and Development Zone, Zhengzhou, Henan Province, China
Contact name:
Zhengzhou KeHui Technology Co., Ltd. |
|
| No. | Welding parameters | Phenomenon | Actions | |
| 1 | Voltage (17.5-19.0) | High | Splashes | Turn down voltage |
| Air hole | ||||
| Low | Narrow and high welding seams | Turn up voltage | ||
| Turn up current | ||||
| Affects welding speed | Turn up current | |||
| 2 | Current (85-100) | Large | Big welding seams | Turn down current |
| Speed up wire feeding | ||||
| Small | Wide welding seams | Lower wire welding speed | ||
| Incomplete welding | Turn up current | |||
| Welding speed affected | Turn down current | |||
| 3 | Wire feeding speed (2-3cm/s) | Fast | Huge welding seams | Lower wire feeding speed |
| Slow | Affects welding speed | Speed up wire feeding | ||
| 4 | Welding wire extrusion length (mm) (8-12) | Long | Small current | Turn up current |
| Splashes | Shorten welding wire extrusion | |||
| Short | Large current | Turn down current | ||
| Blocks air faucet | Lengthen welding wire extrusion | |||
| 5 | CO2 (Steel ball at 5 blocks position of barometer) | Huge | Causes waste | Turn down air feeding |
| Little | Narrow welding seams | Turn up air feeding | ||
| Air hole | ||||
| 6 | Welding speed (less than 0.5cm/s) | Fast | Narrow welding seams | Turn up voltage |
| off and on | Turn up current | |||
| Slow | Huge welding seams | Turn down voltage and current | ||
| Notes | Above actions are only for reference. Specific parameters shall be adjusted according to your actual conditions for the best welding performance. | |||
