Active Member
|
[China]
Address: No33 Wangshan Road, Green Island Economic Development Zone, Shijiazhuang, China
Contact name:
Hebei Kaixiang Electrical Technology Co., Ltd |
|
|
Automatic 3000KW Electrical Load Bank , 60 HZ Resistive Load Bank
Product Description
1. load bank can accurately test the output power and load capacity
of various generator sets
2.the system consists of two parts of measurement and loading,
including AC load bank, data acquisition system, automatic load and
drop control system, cooling device, auxiliary control,PC
software,and so on.
3.The user can freely select local control or software control to
operate the load bank.
Technical Parameter
| Rating Voltage/Frequency | 400VAC/50Hz, 3 phase 3 wire, |
| Max Rated Load Power | Resistive load: 3000kW |
| Load Step | 500.500.1000.1000kw |
| PF(Power Factor) | 1 |
| Adjusting Ability | 1kw-3000kw |
| Load Tolerance (each step) | ±2% |
| Load Tolerance(overall) | ±2% |
| Control Power | 380VAC/50Hz,3 phase 4 wire |
| Display Precision | 0.5 class |
| Wire Connection | Load power supply input——Copper bar (star coupling) |
| Communication Interface | RS485,RS232 |
| Insulation | F |
| Protection Grade | IP54 |
| Way of Working | Continuous Working |
| Casing Dimensions and Cooling | about 7058*2438*2591mm (length*width*height) Forced air cooling,Horizontal inlet air,Vertical cooling |
| Weight | About 7500kgs/set |
| Transportation | Hoisting, there are lifting lug in top of casing |
| Casing Color | Grey(RAL7035) |
| Ambient Temperature | -10℃～+50℃ |
| Relative Humidity | ≤95% |
| Altitude | ≤1500 meter |
| Atmospheric Pressure | 86～106kPa |
| Contactor | Schneider |
| Fuse | DELIXI |
| MCU | INFINEON |
| Data processing software | Kaixiang(self-developed) |
| Alloy Resistance | Kaixiang(self-developed) |
Product Advantage
using the international advanced AC load bank technology, overcome
the old water bank defects, such as bear bumpy, unable to use when
go to sea, realize Mooring Trial and Sea Trail, and simulate the
real working condition of generator running.
Application
1.Manufacturers of standby power generators commonly use load banks
to test and tune newly assembled units
2.generator has been set up in a test cell within the factory, a
test engineer uses the load bank to apply a discrete, selectable
electrical load to the generator and measure the response stability
and endurance.
3.During this process, the test engineer calibrates and adjusts the
generator performance to ensure it meets the intended product
specifications and tolerances.
