Home Companies Witgain Technology Limited

FR4 TG 2 Layer PCB Circuit Board HASL Peelable Mask

Witgain Technology Limited
Active Member

Contact Us

[China] country

Address: Room 1520, Block 11, International E-Commerce Logistics Center, PingAn Road, PingHu Street, LongGang District, ShenZhen City, China 518111

Contact name:Steven YU

Inquir Now

Witgain Technology Limited

FR4 TG 2 Layer PCB Circuit Board HASL Peelable Mask

Country/Region china
City & Province shenzhen
Categories Other Access Control Products
InquireNow

Product Details

2 Layer FR4 Printed Circuit Board Peelable Mask

 

 

  • Main Features:

 

1 2 Layer FR4 substrate material printed circuit board.

2 Double layer copper, copper thickness is 35um/35um.

3 Finished pcb thickness is 1.6mm.

4  PCB drawing size is 233.1mm*130.81mm/2pcs

5 HASL+ Peelable Mask surface treatment.

6 2 layer pcb with 8/8mil min line space and width.

7 Green solder mask and white silkscreen.

8  Need customer to send us the gerber file or PCB file

 

 

  • Our Capabilities:
NOItemCapability
1Layer Count1-24 Layers
2Board Thickness0.1mm-6.0mm
3Finished Board Max Size700mm*800mm
4Finished Board Thickness Tolerance+/-10% +/-0.1(<1.0mm)
5Warp<0.7%
6Major CCL BrandKB/NanYa/ITEQ/ShengYi/Rogers Etc
7Material TypeFR4,CEM-1,CEM-3,Aluminum,Copper, Ceramic, PI, PET
8Drill Hole Diameter0.1mm-6.5mm
9Out Layer Copper Thickness1/2OZ-8OZ
10Inner Layer Copper Thickness1/3OZ-6OZ
11Aspect Ratio10:1
12PTH Hole Tolerance+/-3mil
13NPTH Hole Tolerance+/-1mil
14Copper Thickness of PTH Wall>10mil(25um)
15Line Width And Space2/2mil
16Min Solder Mask Bridge2.5mil
17Solder Mask Alignment Tolerance+/-2mil
18Dimension Tolerance+/-4mil
19Max Gold Thickness200u'(0.2mil)
20Thermal Shock288℃, 10s, 3 times
21Impedance Control+/-10%
22Test CapabilityPAD Size min 0.1mm
23Min BGA7mil
24Surface TreatmentOSP, ENIG,HASL, Plating Gold, Carbon Oil,Peelable Mask etc

 

  • FQA:

 

Q1: What is the Standard PCB Thickness?

A1: The most common PCB thickness for an FR-4 Printed Circuit Board is 1.57 mm (0.062 inch). This is most the widely used PCB thickness in the industry and is usually the default thickness offered when using the FR-4 substrate.

However, as technology advances and circuits become more complex, the number of layers increases and so does the copper weight. This has resulted in a few more common PCB thickness options that include 93 mils (2.36mm) and 125 mils (3.17mm).

PCB thickness refers to the thickness of the finished Printed Circuit Board. The thickness of the PCB mainly depends on factors such as the number of layers, copper thickness/weight, the substrate used and the operational environment. When discussing the standard PCB thickness, there is no official standard for PCB thickness. But, certain sizes are preferred and have become standard practive among PCB manufacturing companies.

                                                   Standard 2 layer PCB thickness

 

 

Most PCB manufacturers can fabricate a board with a custom thickness, however, this has its drawbacks and challenges. Most of their equipment is already calibrated to a set of certain fixed thickness options. Using a custom thickness can result in them having to adjust their equipment to fit a specific requirement. This can be done but will result in a higher cost and higher turnaround time.

Design factors that impact PCB thickness:

The following design factors need to be considered during the PCB design phase.

Copper thickness: Copper thickness or copper weight plays an important role in deciding the thickness of a PCB. The thicker the copper layer, the more current it can carry. This thickness needs to be decided based on the required application. The standard thickness of the copper layer is 1.4 to 2.8 mils (1 to 2 oz), but the copper thickness can be adjusted if required. As copper thickness increases, the PCB board thickness also increases.

The required copper thickness depends on the application. For example, a copper trance that needs to carry a high power signal will need to be thicker than one that needs to carry a low power signal.

In most cases, the copper thickness is 1 oz so a PCB manufacturing company will try to adjust the thickness of prepreg and core to try and see if they can meet their target PCB thickness.

Board material: The material selection is one of the factors that decide the PCB thickness. Typically, the board fabrication materials include the material for substrate, laminate, solder mask, and silkscreen. Of these, the substrate and laminate material plays important role in deciding the PCB thickness, as these materials form the board’s structure. Usually, the substrate material is epoxy resin, glass weave, or ceramic, and the laminate material is thermoset resin and either paper or cloth layers. These materials not only decide the PCB thickness; they also decide the thermal, mechanical, and electrical properties of the circuit board.

The number of PCB layers: The number of PCB layers is a major factor that decides the PCB thickness. Based on the application requirement, the number of PCB layers can vary. The higher the number of layers, the thicker the board. A standard PCB with thickness of 1.57 mm (0.062 inch) can have 2 to 6 layers. Anything more than this would result in a thicker printed circuit board. The layer count can to up to 60 layers in some cases, so the board thickness can increase significantly.

Size, weight, and flexibility: Selecting the right PCB thickness for your application depends on several factors. A rigid thin PCB board is usually brittle and can break or crack easily. So, this would not be the right board for use in a rugged environment. A thicker rigid board will be more durable. However, in certain cases, flexible boards are required, the thinner the board the more flexible it is. So this is very subjective and depends on the customer's application.

Manufacturing factors impacted by PCB thickness:

Copper thickness: When a thicker copper layer is used by a PCB the etching process becomes more complicated and can result in the board become more expensive to fabricate.

Depanelization method: The depanelization method is another manufacturing factor that impacts the PCB thickness. Based on the PCB thickness, the fabricator will choose the depanelization method. For example, thicker boards are depanelized by using V-scoring, while the thinner boards are depanelized by using breakaway tabs.

Layer count: When the layer count increases, PCB thickness also increases. The manufacturing of multi-layer boards becomes significantly more challenging.

Factors that need to consider when using a custom PCB thickness:

Usually, PCB manufacturers recommend a set of standard PCB thickness values that they can handle without making any adjustments to their machines. Even though this can be customized, the customer must consider the following points while deciding on a custom PCB thickness:

Know the PCB manufacturer’s equipment capability: It is better to know the PCB manufacturer’s equipment capability; before the PCB design process. It is helpful to avoid the PCB redesign process.

High turnaround time: The customized PCB thickness will need some adjustments to the manufacturing machines. It will increase turnaround time when compared to the standardized PCB thickness.

Additional cost: Yes, some additional costs will need to spend on custom PCB thickness because it may need extra work, material, and manpower than standard thickness PCB.

 

 

 

 

 

 

 

Hot Products

Double Layer FR4 Substrate Material PCB Blue Solder Mask Ink Main Features: 1 2 Layer FR4 substrate ...
PCB Used In Children'S Alarm Clock White Solder Mask Black Silkscreen 1.2mm Main Features: 1 2 Layer ...
Double Layer Printed Circuit Board Pcb 1.6mm Thickness HASL Main Features: 1 2 Layer FR4 substrate ...
2 Layer FR4 Printed Circuit Board Carbon Ink Treatment Immersion Gold Main Features: 1 2 Layer FR4 ...
2 Layer FR4 Printed Circuit Board Peelable Mask Main Features: 1 2 Layer FR4 substrate material ...
2 Layer PCB Printed Circuit Board Black Solder Mask Immersion Gold Main Features: 1 2 Layer FR4 ...