Four Pole Spd Surge Protector High Standard , Single Phase Surge Protection Device

four-pole surge protector for installation in distribution boards

Product introduction

   The toer surge protector is designed and manufactured according to the standard of IEC and GB, and meets the requirements of IEEE802.3AT. We use the brand components to make use of advanced production technology. It has the characteristics of large flow capacity, low residual pressure level, sensitive reaction, stable performance, reliable work and so on.
   No matter what weather it is, you can rest assured that you can use it safely, and no longer need to worry about the harm of thunderstorm.

Product specification

  1. Rated Operating Voitage(UC):275V

  2. Voltage protective level(UP):1.1KV

  3. Max discharge current(IMAX):20KA

  4. Nominal discharge current(IN):10KA

  5. Ressponse time(NS):<25

Product features

  1. the speed of response is 0.001 seconds, and the voltage is controlled in the range that the equipment can withstand.

  2. using the latest arc extinguishing technology to avoid fire completely

  3. leakage current is small, the response time is fast, and the residual pressure is low

  4. installation is easy and easy to use

Notice of product

  1. surge protector is installed with 35MM standard guide rail

  
  2. The establishment of equipotential connection between  devices and SPD

  3. data line: more than 2.5mm2; when the length of more than 0.5 meters of more than 4mm2

  4. identify the input / output interface identifier of the lightning protector, input the external line and output the connection device.

Working principle of product

   Power surge protector is divided into two parts: explosion proof box type and modular type. A varistor with excellent nonlinear characteristics is adopted.
   Under normal conditions, the surge protector is in extremely high resistance state, and the leakage current is almost zero, thus ensuring the normal power supply of the power supply system. When the power system surge overvoltage, the power surge protector immediately passes in the nanosecond time, limits the amplitude of the overvoltage to the safe working range of the equipment, and releases the surge energy into the ground. Then, surge protector rapidly changes to high resistance state, so that normal power supply is not affected.

Company profile

   Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.