Active Member
|
[China]
Address: ROOM 614 6/F HONG KONG PLAZA 188 CONNAUGHT ROAD WEST HK
Contact name:Michael Zhu
EVER BEST(HK) LIMITED |
|
|
ABS HI100 Injection Molding Grade Plastic Raw Material with Very High Impact Strength at Room and Cold Temperature for Electric/Electronic Products and Miscellaneous Goods
Quick Detail:
1. Injection Molding
2. Very High Impact Strength
Description:
1. Injection molding ABS grade
2. Very High Impact Strength at Room and Cold Temperature
Applications:
High Impact Strength Applications for Electric/Electronic Products and Miscellaneous Goods(Safety Helmet, Pipe, Fittings, Vacuum Cleaner, Washing Machine, Toys, etc.)
Datasheet:
| Properties | Method | Unit | HI100 |
| Physical | |||
| Specific Gravity , 23℃ | ASTM D792 | 1.02 | |
| Mold Shrinkage , 23℃, 3.2mm , 23℃ | ASTM D955 | % | 0.4 ~ 0.7 |
| Melt Flow Rate , 220℃, 10kg | ASTM D1238 | g/10min | 11 |
| Mechanical | |||
| Tensile Strength at Yield , 23℃, 50mm/min, 3.2mm | ASTM D638 | Mpa | 37 |
| Tensile Elongation at Yield , 23℃, 50mm/min, 3.2mm | ASTM D638 | %, (Min) | 5 |
| Tensile Elongation at Break , 23℃, 50mm/min, 3.2mm | ASTM D638 | %, (Min) | 10 |
| Tensile Modulus , 23℃, 50mm/min, 3.2mm | ASTM D638 | MPa | 1560 |
| Flexural Strength , 23℃, 15mm/min, 3.2mm | ASTM D790 | Mpa | 57 |
| Flexural Modulus , 23℃, 15mm/min, 3.2mm | ASTM D790 | MPa | 1850 |
| Izod Impact Strength , Notched, 3.2mm, 23℃ | ASTM D256 | J/m | 480 |
| Izod Impact Strength , Notched, 3.2mm, -30℃ | ASTM D256 | J/m | 245 |
| Izod Impact Strength , Notched, 6.4mm, 23℃ | ASTM D256 | J/m | 440 |
| Izod Impact Strength , Notched, 6.4mm, -30℃ | ASTM D256 | J/m | 245 |
| Rockwell Hardness , R-Scale | ASTM D785 | 92 | |
| Thermal | |||
| HDT , Edgewise, 1.82MPa, 6.4mm, Unannealed | ASTM D648 | ℃ | 84 |
| VICAT , 50N, 50℃/h | ASTM D1525 | ℃ | 90 |
| RTI Electrical | UL 746B | ℃ | 60 |
| RTI Mechanical with Impact | UL 746B | ℃ | 60 |
| RTI Mechanical without Impact | UL 746B | ℃ | 60 |
| Flammability, 1.5mm | UL 94 | HB | |
| Flammability, 3.0mm | UL 94 | HB |
| Processing Guide (Injection Molding) | |||
| Processing Parameters | Unit | Value | |
| Drying Temperature | ℃ | 80 | |
| Drying Time | hrs | 2 | ~ 4 |
| Minimum Moisture Content | % | 0.01 | |
| Melt Temperature | ℃ | 210 | ~ 240 |
| Cylinder Temperature , Rear | ℃ | 180 | ~ 200 |
| Cylinder Temperature, Middle | ℃ | 190 | ~ 210 |
| Cylinder Temperature , Front | ℃ | 200 | ~ 220 |
| Nozzle Temperature | ℃ | 200 | ~ 230 |
| Mold Temperature | ℃ | 40 | ~ 70 |
| Back Pressure, Hydraulic Type | kg/㎠ | 300 | ~ 600 |
| Screw Speed | rpm | 30 | ~ 60 |
Caution:
1. AVOID DIRECT SUNLIGHT, STORE IN COOL, DRY VENTILATED AREA.
2.KEEP AWAY FROM THE HEAT, SPARK, AND FLAME.
3. DO NOT INHALE GASEMITTED FROM THE HEATED RESIN.
4. DIRECT CONTACT WITH THE MELTED RESIN MAY CAUSE SEVERE BURNS.
5. THE WORKSHOP FLOOR SHOULD BE KEPT CLEAN AT ALL TIMES IN ORDER TO PREVENT ACCIDENT ASSOCIATED WITH LOOSE PELLETS OR FILM
6. DO NOT EAT THE PELLETS AND AVOID INHALING DUST PARTICLES IN THE PACKAGING BAGS.
7. ENSURE THE PELLETS AND PACKAGING BAGS ARE DISPOSED OF PROPERLY AND IN COMPLIANCE WITH LOCAL/STATE REGULATION.
8.LIFTING OF HEAVY BAGS CAN CAUSE DAMAGE TO YOUR SPINE IF NOT DONE CORRECTLY
9. CARE SHOULD BE TAKEN TO AVOID ACCIDENTS WHEN LOADING, UNLOADING OR STACKING THE PRODUCT.
10. THIS BAG SHOULD NOT BE USED FOR ANY OTHER PURPOSES EXCEPT FOR PACKING THE PELLETS.
11. PLEASE REFER TO THE MATERIAL SAFETY DATA SHEET (MSDS) FOR MORE DETAILS.
12. SOME PHISICAL AND/OR CHEMICAL PROPERTIES OF THIS PRODUCT MAY CHANGE WHEN IT'S MIXED WITH OTHER CHEMICAL PRODUCTS. PLEASE TEST IT AND CONFIRM BEFORE USING IT IN THE CONDITION ABOVE.
FAQ:
Question 1: What is the MOQ?
Answer: The MOQ must be a full load container, mixing ohter grades to be a full container is acceptable.
Question 2:What is the MPQ?
Answer: 25 KG/Bag.
Question 3: What is the country of origin?
Answer: The country of origin is Republic of Korea
Question 4: Do you provide COA(certificate of Analysis) and other documentations?
Answer: We provide all documentations including Commercial Invoice, Packing list, Bill of Lading, Declaration of NO-Wood Packing Material, COA, Certificate for Country of Origin, Insurance documents,etc. If you have special requirement, please inform us in advance.
Question 5: What is your shipping term?
Answer: We accept FOB and CIF.
Question 6: Do you accept any customization?
Answer:Yes, we provide tailored-made solutions for your business needs such as color matching etc.
