Home Companies Ningbo Brando Hardware Co., Ltd

3A210-06 1/8'' 3 Position 2 Way Exterior Control Air Pilot Valve

Ningbo Brando Hardware Co., Ltd

Contact Us

[China] country

Trade Verify

Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China

Contact name:Brandon Bao

Inquir Now

Ningbo Brando Hardware Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

3A210-06 1/8'' 3 Position 2 Way Exterior Control Air Pilot Valve

Country/Region china
City & Province ningbo zhejiang
Categories Valves
InquireNow

Product Details

3A210-06 1/8'' 3 Position 2 Way Exterior Control Air Pilot Valve

Installation & Usage:

1.Before installing, be sure the valve hasn't been damaged via transportation.

2.It's suggested to use the medium lubricated by 40μm filter element. Be aware of the flow direction and port size.

3.Please notice whether the installation condition accords with technical requirements (such as“act-uation frequency”, “working pressure” and “scope of application temperature”), then the equipment can be installed and used.

4.Notice the flow direction of air during installation, P is the air intake, A (B) is the work port and R (S) is the exhaust outlet.

5.Take measure to avoid vibration and frozen.

6.Firstly press the base gasket into the base, and then connect the base with the valve body by the affiliated screws. The base gasket can be pressed into the installation places that are not used temporarily, and then seal them with affiliated blank cap. When the system expands, take the blank cap off and install relative air valves;

7.To keep the dust away, please use the silencer for the exhaust ports. Never forget to install dirt-proof boot in air intake and outlet during dismounting.

 

Technical Data:

Model3A210-063A220-063A210-083A220-08
FluidAir(to be filtered by 40 μ m filter element)
ActingExterior control 
Port SizeIn=Out=1/8''In=Out=1/4''
CV0.780.89
Valve Type 3 Port 2 Position
Operating Pressure21~114psi(0.15~0.8MPa)
Temperature-20~70℃
Material of bodyAlumium Alloy
Max. frequency5 cycle/sec


 

Dimension Diagram:

 

Brando Supply:
1.Solenoid Valve:
Pulse Jet Valve: Goyen Type Pulse Jet Valve, SBFEC Type Pulse Jet Valve, ASCO Type Pulse Jet Valve , Turbo Type Pulse Jet Valve.
Direct Acting Solenoid Valve:Brass Solenoid Valve, Stainless Steel Solenoid Valve, Plastic Solenoid Valve and etc.
Refrigeration Solenoid Valve:Castel Type Solenoid Valve, Danfoss Type Solenoid Valve.

2.Repair Kit:Solenoid Coil, Solenoid Armature/Stem, Diaphragm Repair Kit and etc.

 

Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

 

Welcome to your any question and inquiry!

Hot Products

2P025-08 1/4'' Inch Air Control Plastic Pneumatic Solenoid Valve Product Features: 1. Safety, ...
2V025-06 1/8 Inch Mini Air Control Single Solenoid Pneumatic Valve Product Features: 1. Safety, ...
2V025-08 1/4'' NPT 2/2 Way Direct Acting Pneumatic Solenoid Valve Description of 2V025-08 Solenoid ...
2V025-08 1/4'' Flying Leads Type Direct Acting Pneumatic Air Valve Installation & Usage: 1.Check ...
3A210-06 1/8'' 3 Position 2 Way Exterior Control Air Pilot Valve Installation & Usage: 1.Before ...
4A210-06 1/8'' 5 Position 2 Way Single Pilot Pneumatic Air Valve Product Features: 1.Structure in ...