|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
2V025-08 1/4'' Flying Leads Type Direct Acting Pneumatic Air Valve
Installation & Usage:
1.Check whether the components have been damaged during transportation before installing and using.
2.Pay attention to whether the flow direction of air (notice “→” direction) and thread type are correct.
3.Please notice whether installation condition accords with technical requirements (such as “working pressure” and “applied temperature range”);
4.Take measure to avoid vibration and frozen.
5.Before using the fittings and tubes make sure they are clean. When connecting tofittings, be sure the PTFE Thread Seal Tape is used correctly.
6.Keep the dust away. The dust cover shall be installed in intake and outlet when the device is dismantled and stored.
Description of 2V025-08 Solenoid Valve:
1.The strength of the aluminum alloy valve body is large. The valve
body is made of new aluminum alloy material, which has strong
pressure resistance,good corrosion resistance and fast heat
dissipation.
2.High quality sealing ring. High quality seals for durability and
longer life
3.High frequency sub-head. Made of high-quality conductor material
with 6 times in 1 second high intensity and high frequency response
for smoother operation
4.The coil is easy to disassemble. Removable core nut, coil damage
can be replaced at any time
5.High quality electronic components. The copper coil can work hard
for a long time, and the wiring operation is simple.
6.Used for controlling pilots or diaphragms of larger valves or
small cylinders or any pressure system that is alternatively
pressurized and exhausted.
Product Video of 2V025-08 Solenoid Valve:
Main dimension of 2V025-08 Pneumatic Solenoid Valve:
Technical parameters of 2V Series Pneumatic Solenoid Valve:
| Model No | 2V025-06 | 2V025-08 |
| Fluids | Air. Water. Oil | |
| Action | Direct acting | |
| Type | Normally Closed (NC) | |
| Orifice size(φmm) | 2.5 | 2.5 |
| Cv value | 0.23 | 0.25 |
| Port size | 1/8" | 1/4" |
| Viscosity limit | Under 20Cst | |
| Pressure range | 0~1.0MPa (0~145psi) | |
| Proof pressure | 1.5MPa (215psi) | |
| Material body | Anodized Aluminum | |
| Seal material | NBR | |
| Min. activating time sec | 0.05 sec and below | |
More Pneumatic Solenoid Valves for you to choose:
Brando offers multiple port and position configurations. Most air control valves are available with 220VAC, 110VAC, 24VDC or 12VDC solenoid coils. Select from 5/2 way, 5/2 way or 3/2 way.
Brando Supply:
1. 5/2 Way Pneumatic Solenoid Valve: 4V110-06, 4V120-06, 4V210-06, 4M220-06, 4V210-08, 4V220-08,
4V310-08, 4V320-08, 4V310-10, 4V410-15, 4V420-15, 4M110-06,
4M120-06, 4M210-06, 4M220-06, 4M210-08, 4M220-08, 4M310-08,
4M320-08, 4M310-10, 4M320-10
2. 5/3 Way Pneumatic Solenoid Valve: 4V130C-06, 4V130E-06, 4V130P-06, 4V230C-06, 4V230E-06, 4V230P-06,
4V230C-08, 4V230E-08, 4V230P-08, 4V330C-08, 4V330E-08, 4V330P-08,
4V330C-10, 4V330E-10, 4V330P-10, 4V430C-15, 4V430E-15, 4V430P-15
3. 2/2 Way Pneumatic Solenoid Valve: 2V025-06, 2V025-08
*4V100 Pneumatic Valves *4V200 Pneumatic Valves *4V300 Pneumatic Valves *4V400 Pneumatic Valves
*5/2 Way Pneumatic Valve *5/3 Way Pneumatic Valve *2/2 Way Pneumatic Valve *Pneumatic Fast Fitting
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
