|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
AUTO Reset White Compressor Portection Air Compressor Pressure Switch
AUTO Reset Air Compressor Pressure Switch is used to protect compressor. It can control the pressure and keep it in a balance range to make the system work well.
Introduction:
1, P series pressure control can protect compressors in
refrigeration and air-condition plant, and keep them from over-low
pressure or over-high suction pressure.
2, P series pressure controls can start and stop refrigeration
compressors and fans of air condensers.
3, P series pressure controls can be used not only in fluoride
refrigeration, but also in air and liquid.
4, P series pressure controls are fitted with 3 kinds of changeover
switch: a single pole double throw (SPDT), a double pole single
throw(DPST) and a double pole double throw(DPDT). The position of
the switch is determined by the pressure control setting and the
pressure at the connector.
The Structure Diagram:
Specification of Pressure Switch:
| Model | Pressure Range(bar) | Differential Pressure(bar) | Factory Setting(bar) | Max. gas tight test Pressure(bar) | |
| Fig.1 | Fig.2 | ||||
| MLSP502 | -0.5~2 | 0.2~0.7 | 1 | 0.5 | 16.5 |
| MLSP503 | -0.5~3 | 0.35~1.5 | 2 | 1 | 16.5 |
| MLSP506 | -0.5~6 | 0.6~4 | 3 | 2 | 16.5 |
| MLSP506M | -0.5~5.5 | ≤1 | Manual reset | 3 | 16.5 |
| MLSP110 | 1~10 | 1~3 | 6 | 5 | 16.5 |
| MLSP516 | 5~16 | 2~5 | 10 | 8 | 33 |
| MLSP520 | 5~20 | 2~5 | 16 | 14 | 33 |
| MLSP530D | 5~30 | 3~10 | 20 | 15 | 33 |
| MLSP530 | 8~30 | 3~5 | 20 | 15~17 | 33 |
| MLSP503M | 8~30 | ≤5 | 20 | Manual reset | 33 |
More details for you know us more:
Q1: Where is your factory located?
A1: Our factory is located in Ningbo. Nearby Ningbo port, the second largest port in China, convenient transportation and low cost, and close to Shanghai
Q2: Is availabe to get sample, and how can I get some samples?
A2: We are honored to offer samples to you when the prices are confirmed. Samples are free, however, the freight cost should be collected by customer. If sample quantity is more than our regular one, we will extra collect sample cost.
Q3: What is your payment term?
A3: 30% TT in advance, the balance payment 70% against copy of b/l.
Q4: What’s your delivery time?
A4: Normally, we keep stocks, if to produce, normally around 2 weeks. If you are in urget to get, we will speed up to satisfy you as much as we can.
Q5: How does your factory do regarding quality control?
A5: We control strictly in every step: choosing best material for our products, such as HP59-1 for our brass fitting, Automatic CNC manufacturing, and 100% test for air pressure and inspection for product appearance.
Q6: Have you exported to other countries?
A6: Yes, we have about 10 years experience of exporting to abroad, we have customer in America, USA, Europe, Mid East and so on. We have experience to pack goods well to avoid any mistake on sea shipment.
The pictures about the solenoid valve:
Welcome your any question, we will response at once. We also can produce as customized.
Welcome your drawing or sample.
