|
[China]
Trade Verify
Address: 608, Building B, Yinyi Duhui Guoji, No.8, Lane 559, Youngor Avenue, Haishu District, Ningbo, China
Contact name:Brandon Bao
Ningbo Brando Hardware Co., Ltd |
|
Verified Suppliers
|
|
|
Two-position Five-way G1/8 Inner Guide Type Pneumatic Cylinder Valve
The Two-position Five-way pneumatic cylinder valve with F class. IP65 insulation and potection class. The Wiring form is lead wire or connector type. The air inlet, air outlet and exhaust's port size are all G1/8. We have special technology for bore, low friction force, low start pressure.
The Structure Diagram:
Detailed Specification of Pneumatic Cylinder Valve:
| Position and Way No. | Two-position Five-way |
| Port Size | Air Inlet=Air Outlet=Exhaust=G1/8 |
| Working Mdium | 40 Micron Filtered Air |
| Working Pressure | 0.15-0.8MPa |
| Max. Pressure Resistance | 1.0MPa |
| Motion Pattern | Inner Guide Type |
| Voltage Range | 5-50°C |
| Power Consumption | +/-10% |
| Power Consumption | AC 2.5VA DC 2.5W |
| Insulation and Protection Class | F Class. IP65 |
| Wiring Form | Lead Wire or Connector Type |
| Highest Action Frequency | 5 Cycle/Sec |
| Shortest Excitation Time | 0.05 Second |
More details for you know us more:
Q1: Where is your factory located?
A1: Our factory is located in Ningbo. Nearby Ningbo port, the second largest port in China, convenient transportation and low cost, and close to Shanghai
Q2: Is availabe to get sample, and how can I get some samples?
A2: We are honored to offer samples to you when the prices are confirmed. Samples are free, however, the freight cost should be collected by customer. If sample quantity is more than our regular one, we will extra collect sample cost.
Q3: What is your payment term?
A3: 30% TT in advance, the balance payment 70% against copy of b/l.
Q4: What’s your delivery time?
A4: Normally, we keep stocks, if to produce, normally around 2 weeks. If you are in urget to get, we will speed up to satisfy you as much as we can.
Q5: How does your factory do regarding quality control?
A5: We control strictly in every step: choosing best material for our products, such as HP59-1 for our brass fitting, Automatic CNC manufacturing, and 100% test for air pressure and inspection for product appearance.
Q6: Have you exported to other countries?
A6: Yes, we have about 10 years experience of exporting to abroad, we have customer in America, USA, Europe, Mid East and so on. We have experience to pack goods well to avoid any mistake on sea shipment.
The pictures about the solenoid valve:
Welcome your any question, we will response at once. We also can produce as customized.
Welcome your drawing or sample.
