|
[China]
Trade Verify
Address: Suzhou Xupai Road No.3
Contact name:Yuki Fu
Suzhou Delfino Environmental Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Date Record RS485 Interface PH Water Analyzer For Water Quality Monitoring
DUC2-PH-S-D pH controllers all use imported chips and components, and the surface-mounted production process is adopted to ensure stable and reliable operation of the instrument;
Simultaneous display of multiple parameters: It can display pH value, temperature value, high alarm setting value, low alarm value at the same time Point alarm setting value, whether the meter is in high or low alarm state, and the current time.
All parameters are clear at a glance. The PH value corresponding to
the unique 4-20 mA current output is reversible and can be set to
any value, which can bring more special convenience to users. It
adopts waterproof and gas-proof fully sealed shell, which can be
used in very harsh environmental conditions, and the protection
level reaches IP66.
Specification:
| Model | DUC2-PH-S-D | |
| Software Version | DRFN PH Analysis software V1.0 | |
| Sensor Input | Compatible with all DRFN's PH Digital Sensors | |
| Display Range | PH | -2~+16pH |
| ORP | ±3000mV | |
| TEMP | -10～500℃ /14~932℉ | |
| Resolution | PH | 0.01pH |
| ORP | 1mV | |
| TEMP | 0.1℃/ 0.1℉ | |
| Relay Control | 2 settable SPST relays, max. Load 3A/250VAC | |
| Analog Current | 2 settable 0/4~20mA current outputs, max. Load 1000 ohms | |
| Communication Method | Two-wire RS485 interface; MODBUS RTU; JSON text data format | |
| OTA | —— | |
| Display Screen | 128*64 black-and-white graphic lattice LCD adjustable backlight mode adjustable display rate | |
| Configuration Information | Power off protection, parameters are retained indefinitely | |
| Time/Data Record | Year/month/day/hour/min/second, record 14000 historical data record interval can be set between 1~999 minutes | |
| Maintenance Records | Last 100 times | |
| Protection Level | IP66 | |
| Operating Environment | 0～60℃,RH<95% ( no condensation) | |
| Storage Environment | -20～70℃,RH<55% ( no condensation, precision instruments) | |
| Shell Material | Enhanced ABS | |
| Dimension | 144*144*120 mm | |
| Mounting Method | Wall mounting, pipe clamping, panel (hole size 138*138 mm) | |
| Electrical Interface | The back end reserved 3 M12*1.5 Gram head, line diameter 3~6.5 mm | |
| Power Supply | 100～240VAC | |
| Power Consumption | About 7W | |
| Weight | About 800g | |
More details please refer to catalog here:
Brief introduction:
● Compatible with all DRFN digital PH/ORP sensors;
● Automatic temperature compensation;
● The working status of the sensor can be queried, including
reading the serial number;
● Support a variety of installation methods;
● Time and historical data recording function;
● 3.2-inch large LCD screen;
● User-friendly Chinese and English language interface;
● Password can be set to prevent misoperation;
● 2 SPST multi-function and settable relays;
● Two 0/4~20mA active current loop outputs;
● RS485 interface, Modbus RTU communication protocol;
● IP66 waterproof level, sealed enclosure can isolate pollution and
corrosive gas;
● Select the temperature display unit, "℃" or "℉" can be selected.
Aplication:
Water treatment monitoring
Drinking water,surface water,water quality analyze,ground
water,ect.
Industrial process monitoring and dosing control
Chemical,petroleum,paper,food and medicine,PCB manufacturing,etc.
FAQ
Q1. Does the instrument have a self-diagnostic function and how
does it prompt?
A: The pH meter has self-diagnosis function.When the instrument is
in calibration and maintenance,it can diagnose the PH/ORP sensor,if
there is improper operation or poor PH/ORP sensor characteristics,
the screen makes an image display and advises the user to
re-maintain or replace the sensor.
Q2. What are the special advantages of the pH instruments?
A: The instrument can not only compensate the temperature of the
test sample by connecting the temperature sensor, but also
self-check the working temperature of the instrument in real time.
When the working temperature of the instrument changes, the
instrument compensates the hardware change caused by the
temperature drift. Make the test results more accurate, this is a
patented technology.
Q3. Does the operation interface support customization?
Yes, our operation interface can be tailored to customers' needs.
Q4.Can our company's logo be added to your company's products?
Of course, we support OEM services for customers.
Q5.DO your controller with OTA function?
Yes. our DUC2-PH-S Controller with OTA function.
Q6.How long is the warranty period?
The company guarantees the instrument for one year (12 months) from
the date of leaving the factory, and the consumables and wearing
parts in the equipment are not covered by the warranty.
