Active Member
|
[China]
Address: 4113-4116# A Area, HSST PARK, BAO'AN District, Shenzhen, China
Contact name:Wendy
Abis Circuits Co., Ltd. |
|
|
Multilayer PCB in 0.2-8.0mm Thickness Prototype Printed Circuit Board For Electronic Used
ABIS CIRCUITS CO., LTD is a professional PCB manufacturer which is focus on double side, Multilayer and HDI pcb mass production. The company was established on 2006, We have two factories together(audited by UL,ISO9001/14001,SGS,RoHS report) ,And all products adhere to IPC Class 2&3 international PCB standard.
Product Details:
| No. of Layers | 1-40 layers |
| Max. Board Size | 860*610mm |
| Board Thickness | 0.2-6.0mm |
| Copper Thickness | 0.5OZ-6OZ |
| Material | Various |
| Surface Finish | Various |
| Soldermask | Various |
| Minimum Soldermask Thickness | 0.025mm |
| Minimun Soldermask BridgeDam | 0.15mm |
| Minimum Soldermask Clearance | 0.075mm |
| Peelable Colours | Blue |
| Peelable Minimum Feature | 0.5mm |
| Peelable Maximum Tented Hole | 3.0mm |
| Scoring Angle | 30 Degrees |
| Min. Remaining Thickness | 0.3mm |
| Min. Distance to copper (From center of scoring line) | 0.5mm |
| Min. Track | 0.1mm |
| Min.Gap(TrackTrack,TrackPad,PadPad) | 0.1mm |
| NPTH Min. Drill Size | 0.2mm |
| Plated Drill Size | ± 0.075mm |
| Non-Plated Drill Size | ± 0.05mm |
| Drill Location Tolerance | ± 0.05mm |
| OutlineRouted Slots | ± 0.1mm |
| Line Width/Spacing | ±10% |
| Board Thickness | ±10% |
| Warp and Twist | 0.05% |
| Scoring/V-Cut | ± 5 degrees |
| Scoring Positional Tolerance | ± 0.1mm |
| Aspect Ratio | 10:01 |
Quick Turn Lead time:
| Category | Quickest Lead Time | Normal Lead Time |
| Double sided | 24hrs | 120hrs |
| 4 Layers | 48hrs | 172hrs |
| 6 Layers | 72hrs | 192hrs |
| 8 Layers | 96hrs | 212hrs |
| 10 Layers | 120hrs | 268hrs |
| 12 Layers | 120hrs | 280hrs |
| 14 Layers | 144hrs | 292hrs |
| 16-20 Layers | Depends on the specific requirements | |
| Above 20 Layers | Depends on the specific requirements | |
Our Mission:
PCBs for demanding customers, on time with zero defects, produced
sustainably at the lowest total cost. Manufacturing many different
types of PCBs in smaller series (High-mix, Low-volume) involves
constantly adjusting, adapting and problem solving.
Our responsibility:
We know that the PCB is a critical key component for our customers.
And we know for sure that anything can happen during the complex
production process involved – and it often does. In our world,
taking full responsibility means a lot of things, including a
responsible and sustainable approach in everything we do –
socially, environmentally and ethically. When a problem occurs, we
try as hard as we can to understand the problem and find a
solution. Our mindset is that we own the problem and don’t leave
until we have cleared it up.
FAQ:
Certifications:
Workshop View:
