|
[China]
Trade Verify
Address: 14F, Duocai B Bd, Guanlan Hi-Tech Park, Guanhu, Longhua, Shenzhen, Guangdong, China. P/c : 518110
Contact name:David He
KOCENT OPTEC LIMITED |
|
Verified Suppliers
|
|
|
Round Boot Flight Type SC APC UPC Optical Fiber Fast Connector For FAT FTB FDB CTO Box
Feature:
- Unique Box type crimping technology;
- Precision metal alloy components coaxial autocollimator on the
core, excellent durable optical performance;
- Fiber axial solid fit, reducing the performance degradation
caused by the loss of matching fluid;
- Intermittent fit connection technology to ensure signal
transmission;
- Bare fiber, tight-clad and pigtail triple can fully meet
environmental requirements for end-customer;
- Integrated shell protection, can be long-term used outside;
- High rate of success for installation and easy installation, the
average connecting time is 150 seconds;
- It is applicable for optical fiber splicing and restoration for
damaged lines.
Description:
- Proven mechanical splice technology ensuring precision fiber
alignment, a factory pre-cleaved fiber stub and a proprietary
index-matching gel combine to offer an immediate low loss
termination to either single-mode or multimode optical
fibers.
- Can be reconnected in the field
- No epoxy or polishing required
- Compatible with both 3mm drop cable and 3x2mm flat cable
- Fast and easy installation.
- Field-termination connector with no epoxy or polishing required
- No matching gel enables low reflection and high reliability
- Splicing point is inside of the connector. No additional splicing
work required
- Easily assembled with one-touch, push-pull system
- Used for φ3.0mm,φ2.0mm cable and 3x2mm drop cable etc
- The fusion splice position can be protected by the heat
shrinkable tube inside, not easy broken
- 100% qualified, prolong use life, reduce the Maintenance cost
- The operator can confirm if the splicing is successful by the
monitor of fusion splicing machine, to make it have more stability
- The 1 ferrule without on-site grinding, can be directly connected
with the butterfly cable, Phi 3, Phi 2, Phi f0.9 weld.
- Can achieve high optical performance, the average insertion loss
of less than -0.20dB, the return loss is more than 55dB.
- Products in the use of the process is not affected by the
environment, the basic optical properties no change, no failure
rate, long service life, reduce the cost of late maintenance.
- Tail specific optical fiber "micro bend" structure can be when
the tail cable is subjected to violent tension to protect the
effective.
- Splice inside the connector on the protection of the heat
shrinkable tube, effective to splice protection, ensuring product
safety performance and service life
- The rear end of the special stepped up structure, the product of
tensile strength is greater than 60N.
- The operation is simple and quick, the operator needs no
professional skills.
Characterist:
| ITEM | Technical Parameters |
| Applicable for | φ 0.25 mm& φ 0.90 mmFiber |
| Optical fiber diameter | 125μ m ( 652 & 657 ) |
| Tight buffer diameter (μ m) | 250μ m |
| Fiber mode | Single & multimode |
| Operation time | About 60s(no fiber cut) |
| Average Insert loss | ≤ 0.25dB(1310nm & 1550nm) |
| Return loss | ≤ -45dB |
| Fastening strength of naked fiber | > 5 N |
| Fastening strength of naked fiber holder | > 10 N |
| Using temperature | -40~+75°C |
| Repeatability(10 times) | Δ IL ≤ 0.2dB ΔRL ≤ 5dB |
Relation products:
Delivery Time:
- Material Preparation Time: 3 days (or inventory)
- Production & Assembly Time 7 days
- Testing & Packaging Time: 2 days
- Total Delivery Time: 12 days in 50,000pcs for safe delivery lead time.
- The faster delivery could be negotiable.
Factory photo:
Kocent Optec Limited is one of leader supplier of fiber optic fast
connector in China.
Most of our fast connector meet Telecom requirement as Viettel,
VNPT, ...
Logo print is free for quantity more than 10k (pcs).
Logo Lettering is free for quantity more than 100k (pcs)
Contact with our sales team for your OEM and ODM order.
