Waste Wood MDF Production Line With Laminate Machine

MDF Plant Machinery Line With Laminate Machine

The MDF production line consists of chip preparation, fiber preparation, glue mixing and applying, mat-forming and hot-pressing, cooling and sizing, sanding. It can be used in furniture-making, flooring-making, packing industry, sound box, construction and decoration of vehicle or vessel etc.We can provide 1500-8000 m3 MDF production line as well as a single machine supplement such as chipper, refiner, dryer, forming machine, pre-press, hot press etc.

Properties
Over time, the term MDF has become a generic name for any dry process fibre board. MDF is typically made up of 82% wood fibre, 9% urea-formaldehyde resin glue, 8% water and 1% paraffin wax and the density is typically between 500 kg/m3 (31 lb/ft3) and 1,000 kg/m3 (62 lb/ft3) The range of density and classification as light, standard, or high density board is a misnomer and confusing. The density of the board, when evaluated in relation to the density of the fibre that goes into making the panel, is important. A thick MDF panel at a density of 700–720 kg/m3 may be considered as high density in the case of softwood fibre panels, whereas a panel of the same density made of hard wood fibres is not regarded as so. The evolution of the various types of MDF has been driven by differing need for specific applications.
 

If you are interested, do not hesitate to contact me.

REGARDS!