Supply and service scope:
Feasibility Studies
Plant Design
Material and Equipment Supply
Commissioning and Start-Up
Construction, Installation and Supervision
Contract Management and Implementation
Plant Renovation
Global Consulting Services for Plant Operation
Phosphorus iron ring stripping press is one of the necessary
equipment for the production of electrolytic aluminum anode
assembly workshop. It is used for pressing and removing the
phosphorus iron ring of the aluminum guide rod. The guide rod
stepping machine is used to automatically control the positioning,
and the single-pole method of pressing and removing one by one
breaks the phosphorus iron ring of the guide rod and separates it
from the steel claw body of the guide rod. recycle for reuse. It is
mainly composed of stepping mechanism, press-off frame, connecting
rod mechanism, half-ring embracing mechanism, lifting and pressing
mechanism, material guiding device, hydraulic system, electrical
system, etc. Using solid self-lubricating bearings, it is suitable
for high dust and high load environments, eliminating the tedious
work of lubrication.
Technical parameter:
1. Pressure release force: 2240KN
2. Anode group form: single anode
3. Dimensions: 2314X1134X2138(mm)
4. Power: 50KW
5. Working pressure of hydraulic system: P=22Mpa;
6. Equipment weight: press 6556Kg off-line, stepper mechanism
3238Kg
7. Productivity: 35 groups/hour
8. Dimensions: 2312×1134×2138
9. Equipment weight: 8133Kg
Features:
High reliability, full hydraulic drive, PLC automatic control
Process flow:
The guide rod enters the offline area of the phosphorus iron ring,
and the catenary sends out the offline signal and drives away from
the guide rod; the guide rod stepping machine positions the
aluminum guide rod (the frequency converter is used to control the
different speeds of the working and stepping, Control and drive the
aluminum guide rod forward and backward). After the aluminum guide
rod stepping machine pushes the guide rod into the press-off
station, it gives a signal to make the linkage mechanism on the
press-off machine move, drives the double-encircling mechanism to
close, the lower lifting and pressing mechanism goes up, and the
phosphorus iron ring immediately follows. After being pressed,
broken and falling off, the slag guide device falls to the conveyor
and returns to the cleaning area. After cleaning, the
ferrophosphorus is sent back to the ferrophosphorus casting area
for reuse. The driving link mechanism is reset immediately, the
double embracing mechanism is opened, and the stepper pushes the
aluminum guide rod to move to the next station, and starts to press
off the second phosphorus iron ring. When the final press release
of a set of phosphorus iron rings is completed, the stepper pushes
the aluminum guide rod into the catenary line, and returns quickly
to accept the next set of aluminum guide rods. All actions are
automatically completed by the electronic control system PLC, with
the assistance of manual intervention.
CMT has been supplying different kinds scale of Electrolytic
Aluminium Anode Rodding Project at home and aboard on the basis of
Turn-key.
