Home Companies LonRise Equipment Co. Ltd.

Cisco Router Module Cards NIM-1CE1T1-PRI 1 Port Multi-Flex Trunk Voice/ Channelized Data T1/E1 Module

LonRise Equipment Co. Ltd.

Contact Us

[China] country

Trade Verify

Address: 26Minyi Road, Xinqiao, Songjiang Industrail Zone Shanghai China

Contact name:Laura

Inquir Now

LonRise Equipment Co. Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Cisco Router Module Cards NIM-1CE1T1-PRI 1 Port Multi-Flex Trunk Voice/ Channelized Data T1/E1 Module

Country/Region china
City & Province shanghai shanghai
Categories Network Cards
InquireNow

Product Details

Cisco Router Module Cards NIM-1CE1T1-PRI 1 port Multi-flex Trunk Voice/Channelized Data T1/E1 Module

 

NIM-1CE1T1-PRI Overview

 

The Cisco® Fourth-Generation 1-, 2-, 4-, and 8-Port T1/E1 Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4000 Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide superior flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

 

NIM-1CE1T1-PRI is a Cisco Multiflex Trunk Voice and WAN network interface module for ISR 4000 series. Cisco® Fourth-Generation 1-, 2-, 4-, and 8-Port T1/E1 Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4000 Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface (PRI), dial-access integration, and channelized-data (CE1T1) functions to provide superior flexibility, versatility, and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface. These NIMs are not supported with Cisco 2900 and 3900 Integrated Services Routers.

 

NIM-1CE1T1-PRI  Specification

 

NIM-1CE1T1-PRI Specification

Number of Ports

1

Clear-Channel Data

Yes

MFT Packet Voice

Yes

Unstructured E1 (G.703) Support

Yes

Channelized Data

Yes

Configuration Description

Channelized Modules

Data Only

Serial data (channel-group*)

24 per port

E1 unframed G.703

Supported

Voice Only

Voice channel associated signaling (CAS) (ds0-group**)

24 per port (T1)

31 per port (E1)

1 per timeslot

Voice and Data

PRI (pri-group***)

1 per port

Drop and insert

24 per port (T1)

(tdm-group****)

31 per port (E1)

 

1 per timeslot

Dimensions (H x W x D)

1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm)

Environmental

● Operating temperature: 0 to 50°C (32 to 122°F)

● Storage temperature: -20 to +65°C (-4 to 148°F)

● Relative humidity: 10 to 85% noncondensing operating; 5 to 95% noncondensing, nonoperating

T1 Compliance (partial list)

● TIA-968-A

● CS-03

● Jate

● ANSI T1.403

E1 Compliance (partial list)

● TBR4, TBR12, and TBR13

● ITU-T G.703, G.704, G.823, and I.431

● S016 (Australia)

Weight

0.40 lb (181g)

 

 

* channel-group refers to bonding of one or more time slots into a single High-Level Data Link Control (HDLC)-framed serial connection for IP data traffic connectivity. This connection is used for HDLC, Frame Relay, and Multilink PPP (MLPPP) serial WAN connections.

 

** ds0-group refers to bonding of one or more time slots into a single TDM voice connection using CAS such as ear and mouth (E&M), foreign exchange station (FXS), or foreign exchange office (FXO). This connection is used for TDM PBX or PSTN connections and typically is deployed only on T1.

 

*** pri-group refers to bonding of two or more time slots into a single TDM connection using ISDN signaling. This connection is typically used for TDM PBX or PSTN voice connections on T1 and E1, and also for data WAN connections on E1. Each call on the PRI is individually indicated as being a voice or data call with the ISDN bearer capability delivered with the call. Signaling is done on the D-channel, which is always channel 24 on a T1 and channel 31 on an E1.

 

**** tdm-group refers to cross-connecting one or more time slots from one TDM interface to another. This connection is used to groom channels from different access points onto a combined T1 or E1 uplink. Because the router merely cross-connects and does not interpret or route the traffic from the ingress interface to the egress interface, the traffic type (voice and data) is transparent to the router.

 

Business

 

  

 

 

Hot Products

Cisco 4000 Series Integrated Services Router NIM-ES2-4 4-Port Gigabit layer 2 NIM-ES2-4 Overview The ...
Cisco 4000 Series Integrated Services Router Wan Module NIM-2GE-CU-SFP 2-Port Gigabit NIM-2GE-CU-SFP ...
NIM-2MFT-T1/E1 Cisco 4000 Series Router T1/E1 Voice and WAN Network Interface Module NIM-2MFT-T1/E1 ...
HXQ40S QSFP+ 40G-SR4 0.3KM 850NM Compatible 40GBASE-SR4 QSFP+ 850nm 150m MTP/MPO DOM Optical ...
Overview 25GBASE-SR SFP28 DOM Optical Transceiver Module for Data Center and Telecom (MMF, 850nm, ...
Overview SFP-25G-LR Compatible 25GBASE-LR SFP28 DOM Optical Transceiver Module for Data Center and ...