Qsfp-40g-Sr-Bd 40G Optical Transceiver For 150m On Mmf And 500m On Smf

Overview

QSFP BIDI internally multiplexes an XLPPI 4x10G interface into two 20Gb/s electrical channels, transmitting and receiving each optically over one simplex LC fiber using bi-directional optics. This results in an aggregate bandwidth of 40Gbps into a duplex LC cable. This allows reuse of the installed LC duplex cabling infrastructure for 40GbE application. Link distances up to 100 m using OM3 and 150m using OM4 optical fiber are supported.

These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm on one end and 900nm on the other end. The electrical interface uses a 38 contact QSFP+ type edge connector. The optical interface uses a conventional LC duplex connector.

Features

• Compliant to the 40GbE XLPPI electrical specification per IEEE 802.3ba-2010
• Compliant to QSFP+ SFF-8436 Specification
• Aggregate bandwidth of > 40Gbps
• Operates at 10.3125 Gbps per electrical channel with 64b/66b encoded data
• QSFP MSA compliant
• Capable of over 100m transmission on OM3 MMF and 150m on OM4 MMF
• Single +3.3V power supply operating
• Utilizes a standard LC duplex fiber cable allowing reuse of existing cable infrastructure

Parameter

Application

• 40 Gigabit Ethernet interconnects
• Datacom/Telecom switch & router connections
• Data aggregation and backplane applications
• Proprietary protocol and density applications

40G QSFP Porducts