Active Member
|
[China]
Address: 708-709 room,G buliding,ZhiGu Technology Park,YinTian Road,Xixiang, Bao'an District, Shenzhen City
Contact name:
Shenzhen Natywish Technology Co., Ltd. |
|
|
Smart Gigabit Ethernet 10 / 100 / 1000Base -T to 1000Base - SX / LX
Converter with One SFP Slot
Product Description
MCG-SFP series is a Ethernet media converter that converts media transmission between TP copper cablings an fiber SFP(Small Form-Factor Pluggable) Transceivers. The MCG-SFP copper-to-fiber module is available in 10/100/1000Mbps Fast Ethernet types, allowing seamless integration between Fast Ethernet networks using unshielded twisted pair (UTP) copper cabling, and 1000M fiber networks.
The MCG-SFP-L with DIP switch for smart settings of LFP for network diagnosis and transmission mode.
Features
Conversion between different transmission speeds and media types
Standalone and compact hardware design
Auto-negotiating Ethernet port (Speed and Half/Full Duplex)
Auto-crossover Ethernet port (Supports Auto MDI/MDI-X)
Standard open Fiber slots for SFP Transceiver
The transmission of extra-long packes over VLAN
9K Jumbo Frame size supported
Easy-to-view LED indicators provides status to easily monitor network activity
Voltage supervisor
14-Slot Rack compliance
RoHS Compliant
LFP function(Link fault pass through)
With DIP switch to set LFP enable or disenable, to set Cut-through mode or store-and-forward mode
Technical Specifications:
| Parameter | Specifications |
| Access mode | 10/100/1000Mbps Gigabit Ethernet |
| Standard | IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T , IEEE802.3z 1000Base-SX/LX Gigabit thernet,IEEE802.1qVLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree |
| Wavelength | 850nm/1310nm/1550nm or CWDM wavelength |
| Port | One RJ45 connector, connected to STP/UTP category-5 twisted pair One SFP Port, connected to MM or SM fiber |
| Conversion mode | Medium conversion, storing and forwarding |
| MAC address table | I K |
| Buffer space | 1Mbit |
| Flow control | Full duplex state: flow control; half duplex state: back pressure mode |
| Delay | 9.6us |
| Bit error rate | <1/1000000000 |
| MTBF | 100,000 hours |
| LED | POWER (power), FX LINK (fiber link action), TP LINK1000 (twisted pair connection 1000M), TP LINK100 (twisted pair connection 100M), TP ACT (twisted pair packet forwarding action) |
| Power | Input: AC220 1A/ DC-48 Output: 5V 1A |
| Power consumption(Max) | ≤5W |
| Operating temperature | -10~55℃ |
| Operating humidity | 5%~90% |
| Storage temperature | -40~70℃ |
| Storage humidity | 5%~90% (non-condensing) |
| Dimensions | 26mm(H)*70mm(W)*94mm(D) (height * width * depth) |
DIP switch(LFP Function)
SW1 | ON | LFP enable |
| OFF | LFP disable | |
| SW2 | ON | Cut-through mode |
| OFF | Store-and-forward mode |
