Taikang Yinyu Boiler Manufacturing Co., Ltd |
|
Top Heat Efficiency Non Pollution Fully Automatic Electric Heating Hot Water Boiler For School
Advantages
(1) There is no danger of explosion, may not be supervised.
(2) Do not have to consider the problem of pressure relief in the
boiler room.
(3) Save steel and simplify the process.
(4) Scrap boiler re-use.
(5) Cancel the rehydration pump.
(6) Power failure protection.
(7) Durable.
(8) Save users' investments
Part of product parameters
CWDR0.7-95/70
NO; | Name | Unit | Number | Description |
1 | Rated efficiency | MW | 0.7 | |
2 | Water volume | M³ | 1.4 | |
3 | Rated outlet/inlet water temperature | ℃ | 95/70 | |
4 | Heating efficiency | % | 99 | |
5 | Output/inlet diameter | mm | DN100 | |
6 | Design fuels | / | Electric | |
7 | Blow down valve diameter | mm | DN100 | |
8 | Heating area(room) | ㎡ | 6000 | |
9 | Hot water output | M³/h | 18 | |
10 | Bulk size | mm | 2400×1200×1800 |
CWDR1.4-95/70
NO; | Name | Unit | Number | Description |
1 | Rated efficiency | MW | 1.4 | |
2 | Water volume | M³ | 3.75 | |
3 | Rated outlet/inlet water temperature | ℃ | 95/70 | |
4 | Heating efficiency | % | 99 | |
5 | Output/inlet diameter | mm | DN125 | |
6 | Design fuels | / | Electric | |
7 | Blow down valve diameter | mm | DN125 | |
8 | Heating area(room) | ㎡ | 12500 | |
9 | Hot water output | M³/h | 36 | |
10 | Bulk size | mm | 2800×1700×2300 |
Features of hot water boilers
1, the use of microcomputer hot water boiler controller, built-in
backlight LCD screen display, the operation status of the boiler is
clearly visible. All operations are simply done with the keys, and
the boiler controller's super-display and control functions are
complete.
2, ceramic electric heating tube-type hot water boiler using
"hydro-electric separation" of electric heating mode, the electric
heating pipe and furnace water completely separated, boiler use
safe and convenient maintenance, replacement of heating pipe;
3, the user can set any water temperature between 30 degrees C-90
degrees C, boiler in accordance with user requirements of timing,
fixed temperature automatic heating to the heating system or to
provide users with bath, domestic hot water.
4, high-power boilers using step-by-step time-sharing input method
to control the heating group, heating group can be randomly put
into or stop working according to load changes, significantly
reducing the impact on the power grid. At the same time, you can
also manually start and stop the number of heating sections, so
that the user can adjust the boiler power.
5, the control system according to the furnace water temperature
control cycle pump start and stop. The hot water circulation pump
stops when the furnace water reaches the set upper water
temperature, and the hot water circulation pump starts when the
water temperature is lower than the lower limit.
6, bath, domestic hot water boiler internal anti-corrosion
treatment, furnace body is not easy to rust and corrosion, boiler
service life is long, hot water clean, hygienic. The use of
high-level centrifugal fiber fiber cotton multi-layer insulation,
less heat loss, energy saving and consumption reduction;
7, the boiler has leakage protection function (control system
detects power leakage, automatically cut off the boiler power
supply), anti-drying very low water level protection function
(water level is below the set minimum limit water level,
immediately stop and alarm), furnace overheating protection
function (when the boiler shell temperature exceeds 105 degrees C,
immediately shut down and alarm, the temperature normal
automatically start the boiler), temperature sensor abnormal
protection function (control system continuous detection sensor
situation, immediate alarm), The power supply voltage abnormal
protection function (in the event of an abnormal power supply, the
power is automatically powered off.) After normal, automatic return
to work), heating assembly phase-breaking protection function
(monitoring after the heating component is lack ing-phase, shutdown
protection).
8, the top of the boiler with the air-connected exhaust port, the
inner bile does not pressure, the boiler under normal pressure
work, no risk of explosion, completely eliminate the safety
hazards.
9, out, return mouth symmetrical design (double in and out),
suitable for fast connection installation; 1, the configuration of
imported brand burners, high degree of automation, in accordance
with the controller instructions automatic blow-sweep, electronic
automatic ignition, automatic combustion, wind oil (gas) automatic
proportional adjustment, performance safety and stability, good
combustion effect. And there is a flame-out protection device to
ensure safe operation.
2, computer-style hot water boiler controller, all functions are
magically stored on a smart chip, boiler one-click boot, automatic
timing, fixed temperature operation, users can set the start and
stop furnace time, set after completion, do not need to be manned,
save effort.
3, the fire pipe is inserted with flame retardant spoiler, slow the
rate of smoke discharge, strengthen heat exchange, smoke room
discharge of low temperature, reduce heat loss, save fuel.
4, large font display water temperature, easy to master the
operation of the boiler and the system, water temperature from 10
degrees C to 90 degrees C can be set at will, boiler automatic
heating to the system or provide users with life, bath hot water.
5, the control system according to the furnace water temperature
control cycle pump start and stop, the furnace water to the set
upper water temperature when the hot water circulation pump
started, below the setting lower water temperature when the hot
water circulation pump stop.
6, horizontal fuel gas hot water boiler for the three return full
wet back structure, the use of large furnace, group pipe design,
increase the furnace radiation heat absorption, effective energy
saving and consumption reduction. The use of threaded pipe and wave
furnace bile, greatly enhance the heat transfer effect, greatly
save fuel consumption.
7, the whole machine is equipped with overheat protection (when the
water temperature in the furnace is ultra-high, the burner
automatically stops working and beeps alarm, secondary overheating
protection (boiler shell temperature exceeds 105 degrees C,
automatically cut off the secondary circuit), anti-drying water
water protection (when the furnace water is below the very low
water level, the boiler stops working and emits a beep alarm),
boiler leakage protection (control system detects electrical
leakage, short circuit, automatically cut off the power supply).
8, the boiler according to the normal pressure structure design,
the boiler is in a non-pressure state, there is no safety risk.
9, the use of high-level centrifugal glass cotton multi-layer
insulation, famous white color steel plate for the outer packaging,
less heat loss, beautiful rust resistance. Boiler fuel can be
divided into four main categories:
Solid fuels - soot, anthracite, lignite, peat, oil shale, wood
chips, sugar cane slag, rice bran, etc.
Liquid fuel - heavy oil, slag oil, diesel, etc.
Gas fuel - natural gas, urban gas, liquefied petroleum gas, etc.
New fuel one electric energy, light energy, etc. The normal
pressure boiler is also known as the pressure-free hot water
boiler, which refers to the upper of the boiler through the
atmosphere, does not bear the water column static pressure of the
heating system. That is, quite an "open hot water tank".
Circulating water pumps can only be installed in hot water supply
mains, and to install check valves and flow control valves, so the
circulating water pump does not play the role of water circulation,
but the role of pressurized water, is actually pressurized water
pump, it is like a cold water pressurized pump in water supply
engineering. Pump water from the reservoir to the water tower and
then by gravity to the user.
Disadvantages
(1) The problem of the system cycle energy consumption.
(2) The problem of low static pressure of the circulating pump
population.
(3) The problem of high water temperature in the inlet of
circulating water pumps.
(4) The problem of direct contact between pot and water and the
atmosphere.
Pre-sale service:
We help customer choose the best boiler model according to
different requirements of various industry. Before delivery we
will provide foundation drawing, layout drawing, boiler room
layout, etc.
In-sale service:
We keep 24 hours online and keep close contacts during the
production process to ensure on time delivery with perfect
finished product.
After-sale service:
1. provide full range of original spare parts.
2. Engineers abroad installation and commissioning service is
available.
3. Our engineers will held a training for boiler workers to
ensure the safe operation.
4. Free maintenance and repair for one year and lifelong
service.
Boiler application areas
Part of product parameters
CWDR0.7-95/70
NO; | Name | Unit | Number | Description |
1 | Rated efficiency | MW | 0.7 | |
2 | Water volume | M³ | 1.4 | |
3 | Rated outlet/inlet water temperature | ℃ | 95/70 | |
4 | Heating efficiency | % | 99 | |
5 | Output/inlet diameter | mm | DN100 | |
6 | Design fuels | / | Electric | |
7 | Blow down valve diameter | mm | DN100 | |
8 | Heating area(room) | ㎡ | 6000 | |
9 | Hot water output | M³/h | 18 | |
10 | Bulk size | mm | 2400×1200×1800 |
CWDR1.4-95/70
NO; | Name | Unit | Number | Description |
1 | Rated efficiency | MW | 1.4 | |
2 | Water volume | M³ | 3.75 | |
3 | Rated outlet/inlet water temperature | ℃ | 95/70 | |
4 | Heating efficiency | % | 99 | |
5 | Output/inlet diameter | mm | DN125 | |
6 | Design fuels | / | Electric | |
7 | Blow down valve diameter | mm | DN125 | |
8 | Heating area(room) | ㎡ | 12500 | |
9 | Hot water output | M³/h | 36 | |
10 | Bulk size | mm | 2800×1700×2300 |