Active Member
|
[China]
Address: Room 617, Guanlida Building, NO. 269 of Qianjin Road, Wenhui community, Xin'an street
Contact name:Frank
Shenzhen zk electric technology limited company |
|
|
220VAC 1.5Kw 7A Generally Type For Single Phase Motor Solar Pump Inverter
ZK SG320-1K5GB-2S Solar Pump Inverter description
Solar pump inverter, also named solar variable frequency drive
(solar pump VFD)suitable for solar photovoltaic water pump systems.
The direct current generated by the solar modules is input to the
photovoltaic water pump controller, converted into alternating
current, and directly drives various water pumps.
Solar Pump Inverter Features
A.Sleep Function
B.Low-frequency Protection Function
C.Dry Run Protection
D.Over-current Protection
E.Minimum Power Protection
F.Full Water Protection
G.Alarm Recovery Mode: 0: automatic recovery; 1: manual recovery
H.It can work from sunrise to sunset, greatly improving the water pump effective working hours a day.
I.can track maximum power of solar panels, and effective to increase the output power of the solar panels.
J.System has strong anti-jamming capability, in the depth of 200 meters, the system can still be reliable work
Technical Specification
Recommended MPPT voltage range | Vmp 131 to 350 VDC for 1S (90V to 350VDC input, 3PH 110 to 220VAC output) Vmp 260 to 355VDC for 2S ( 150V to 350VDC input, 3PH 220 to 240VAC output) Vmp 486 to 650 VDC for 4T ( 250V to 800VDC input, 3PH 380 to 460VAC output) | |||||||||
Recommended input voltage (Voc and Vmmp) | VOC 184(VDC), Vmpp 155(VDC) for 1S model or 110V AC pumps VOC 372(VDC), Vmpp 310(VDC) for 2S model or 220V AC pumps VOC 648(VDC), Vmpp 540(VDC) for 4T model or 380V AC pumps | |||||||||
Motor type | Control for permanent magnet servo motor and asynchronous motor pumps. | |||||||||
Input power | DC power from solar arrays or AC grid power | |||||||||
Maximum DC power input | 400VDC for 220AC output /800VDC for 380V AC output | |||||||||
Rated output voltage | 3-phase , 110V/160V/220V. 3-phase, 220V/380V/480V | |||||||||
Output frequency range | 0~50/60Hz | |||||||||
MPPT efficiency | 97%, | |||||||||
Ambient temperature range | (G-type inverter with submersible pumps, and P type for general pumps. | |||||||||
Solar pump control special performance | MPPT ( maximum power point tracking), CVT (constant voltage
tracking), auto/manual operation, | |||||||||
Protection function | Phase loss protection, phase short circuit protection , ground to
phase circuit protection , input | |||||||||
Protection degree | IP20, Air force cooling | |||||||||
Running mode | MPPT or CVT | |||||||||
Altitude | Below 1000m; above 1000m, derated 1% for every additional 100m. | |||||||||
SG320 series solar pump inverter dimensions
Power
| H (mm)
| H1 (mm)
| W (mm)
| W1 (mm)
| D (mm)
| Installation Hole
|
SG200-1K5GB-4T
| 170
| 160
| 85
| 67
| 129
| Ф5
|
SG200-2K2GB-4T
| ||||||
SG200-4K0GB-4T
| 195
| 184
|
98
| 85
| 143
| Ф5
|
SG200-5K5GB-4T
|
SG320 series solar pump inverter compatible with dual supply mode
The solar pump inverter operates in dual supply mode either with a three phase input supply from the grid or with DC input supply from PV cells. A four-pole changeover switch enables switching between the two supply modes. At a given time only one supply (PV cell or grid) will be connected to the drive.
