Active Member
|
[China]
Address: Room 617, Guanlida Building, NO. 269 of Qianjin Road, Wenhui community, Xin'an street
Contact name:Frank
Shenzhen zk electric technology limited company |
|
|
Product Feature:
1, Support 220-240V/380-440V, 1PH/3PH pumps.
2,Easy to use, no settings, automatic operation.
3, It has many protective functions, such as input
over-voltage, output over-load,short circuit,
over-temperature and so on.
4,Advanced MPPT Algorithmic Control.
5,ModBus communication function.
6,Support independent or complementary use of
photovoltaic and municipal power.
7, External water level signal control.
8,All-metal chassis structure, strong and durable.
| D1: General type:90V DC to 400V DC or | D2: General type:150V DC to 450V DC or 220V±15% AC, 50/60Hz | ||
| 110V±15% AC, 50/60Hz | |||
| Inverter | Current (A) | Inverter | Current (A) |
| specification | specification | ||
| SU100-D1-R75G-B | 7 | SU100-D2-R75G-B | 4 |
| SU100-D1-1R5G-B | 10 | SU100-D2-1R5G-B | 7 |
| SU100-D2-2R2G-B | 10 | ||
| SU100-D2-004G-B | 16 | ||
| D3: General type:250V DC to 750V DC or 380V±15% AC, 50/60Hz | T3: General type:350V DC to 750V DC or 380V±15% AC, 50/60Hz | ||
| Inverter specification | Current (A) | Inverter specification | Current (A) |
| SU100-D3-R75G-B | 3 | SU100-T3-037G | 75 |
| SU100-D3-1R5G-B | 4 | SU100-T3-045G | 90 |
| SU100-D3-2R2G-B | 6 | SU100-T3-055G | 110 |
| SU100-D3-004G-B | 10 | SU100-T3-075G | 150 |
| SU100-D3-5R5G-B | 13 | SU100-T3-090G | 180 |
| SU100-D3-7R5G-B | 17 | SU100-T3-110G | 210 |
| SU100-D3-011G-B | 25 | SU100-T3-132G | 250 |
| SU100-D3-015G-B | 32 | SU100-T3-160G | 310 |
| SU100-D3-018G-B | 38 | ||
| SU100-D3-022G-B | 45 | ||
| SU100-D3-030G | 60 | ||
Technical specifications
| Item | Specification | |
| Power input | Voltage, frequency | D1: 90V DC to 400V DC or 110V±15% AC, 50/60Hz |
| D2:150V DC to 450V DC or 220V±15% AC, 50/60Hz | ||
| D3: 250V DC to 750V DC or 380V±15% AC, 50/60Hz | ||
| T3: 350V DC to 750V DC or 380V±15% AC, 50/60Hz | ||
| Allowable fluctuations | voltage unbalance rate:<3%; Frequency:±5%; aberration rate: as IEC61800-2 required | |
| Power factor | ≥0.94(with DC reactor) | |
| Efficiency | ≥96% | |
| Output | Output voltage | Output under rated condition: 3 phase, 0～input voltage, inaccuracy<5% |
| Output frequency range | G type:0～600Hz | |
| Output frequency accuracy | Max frequency ±0.5% | |
| Overload capacity | G type: 150% rated current/1 min, 180% rated current/10s, 200% rated current/0.5s | |
| Main control performance | Motor control mode | V/F without PG , VC without PG , VC with PG |
| Speed control range | Vector control without PG, rated load 1:100;Vector control with PG, rated load 1:1000; | |
| Steady speed accuracy | VC without PG: ≤2% rated synchronized speed; | |
| VC with PG: ≤0.05% rated synchronized speed | ||
| Starting torque | VC without PG: when 0.5Hz, 150% rated torque; | |
| VC with PG: when 0Hz, 200% rated torque | ||
| Torque response | VC without PG: ≤20ms; | |
| VC with PG: ≤10ms. | ||
| Frequency accuracy | Digit setting: max frequency×±0.01%; | |
| Analog setting: max frequency×±0.2% | ||
| Frequency resolution | Digital setting: 0.01Hz; | |
| Analog setting: maximum frequency × 0.05% | ||
| product basic functions | DC braking capacity | Starting frequency:0.00～50.00Hz; Braking time:0.0～60.0s; |
| Braking current:0.0～150.0% rated current | ||
| Torque boost capacity | Auto torque upgrade 0.0%～100.0%; | |
| Manual torque upgrade 0.0%～30.0% | ||
| V/F curve | 4 modes: one linearity torque characteristic curve ,one self-setting V/F curve mode, one drop torque characteristic curve (1.1- 2.0 powers),and square V/F curve mode. | |
| Acceleration/Deceleration curve | 2 modes: linear Acceleration/Deceleration and S curve Acceleration/Deceleration. | |
| 4 sets of ACC/DEC, time unit 0.01s selectable, longest time: 650.00s. | ||
| Rated output voltage | Rely on power supply voltage compensate function, while motor rated voltage is 100%, set it at the range of 50-100%(output can not over input voltage). | |
| Voltage auto-adjustment | While power supply voltage fluctuates, it can auto-keep constant output voltage. | |
| Auto energy-saving running | While under V/F control mode, according to load situation, auto-optimize output voltage to save energy. | |
| Standard functions | PID control, speed track, power off restart, jump frequency, upper/lower frequency limit control, program operation, multi- speed, RS485, analog output, frequency impulse output. | |
| Frequency setting channels | Keyboard digital setting, keyboard potentiometer ,Analog voltage/current terminal AI1,AI2, Communication given and multi-channel terminal selection, Main and auxiliary channel combination, expansion card, supporting different modes switch. | |
| Feedback input channel | Voltage/Current Terminal AI1, Voltage/Current Terminal AI12, Communication | |
| given, pulse input X5. | ||
| Running command channel | Operation panel given,external terminal given, communication given, expansion card given. | |
| Input command signal | Start, stop, FWD/REV, JOG, multi-step speed, reset, ACC/DEC time selection, frequency given channel selection, exterior fault alarm. | |
| Protective function | Overvoltage, under-voltage, current limit, over-current, overload, electric thermal relay, overheat, overvoltage stall, data protection, rapid speed protection, input/output phase failure protection. | |
| Environment | Install place | altitude ≤ 1000m,above 1000m down the rated amount, each increase of 100m down the rated mount of 1%;no condensation, ice ,rain, snow, hail; solar radiation below 700W/㎡, air pressure 70-106 kPa. |
| Temperature, humidity | -10 ～ + 50 ℃, derating above 40 ℃, maximum temperature 60 ℃ (no-load operation)5% to 95% RH (non-condensing) | |
| Vibration | When 9～200Hz, 5.9m/s2(0.6g) | |
| Storage temperature | -30 ～+60℃ | |
| Protection grade | IP20 | |
| Cooling method | Forced air cooling | |
Tel: +86-755-23283620
Whatsapp & Skype: +86 18719408744
Email: anna@zundrive.com
