Changzhou Vic-Tech Motor Technology Co., Ltd. |
Verified Suppliers
|
|
12VDC High Torque 35mm Geared Stepper Motor 7.5 ° 2-Phase Stepping Motor Applied To Medical Analyzer Equipment
This motor is a 35mm diameter high torque decelerating stepping
motor with a body height of 35.8mm. The output shaft of the motor
can be customized to install gears and synchronous pulleys. After
the stepping motor is equipped with a gearbox, the step angle is
further subdivided to increase the load torque and control more
accurately
Conventional gear reduction ratios include 3.7, 3.82, 5.2, 5.36,
13.7, 14.62, 19.2, 20.51, 26.85, 28.77, 51, 71100139. Suitable gear
reduction ratios can be recommended according to customer needs,
The output part of the motor is usually a connecting line, or a
customized socket
The mission of the motor is more than 10,000 hours, and the life of
the gear is more than 2000 hours.
Product Name | Geared stepper motor |
Model | PM35L-048-376- 120G |
Resistance | 30Ω±7% |
Current Per Phase | 400 mA/phase |
Type | Permanent Magnet |
Phase | 2 |
Certification | ROHS |
Holding Torque | 9000g.cm / 200PPS |
Diameter | 35mm |
Rated voltage | 12 V |
Pull in Rate | 400pps |
Geaar ratio | 3.7-139 |
weight | 180g |
OEM & ODM SERVICE | AVAILABLE |
The gear box has high precision, high efficiency and low noise,
which makes the product have good reliability.
The power input position of the stepper motor can be in the form of
FPC, FFC, PCB cable, etc.
The output shaft of the motor can adopt various output structures,
such as circular shaft, D-shaft and wire bar.
Number of gear trains | 1 | 2 | 3 | All gears are metal, and the gear reduction ratio marked with * can be customized as plastic gears, which have the advantages of low noise and cheaper price. |
Gear ratioi | 3.7 | 13.7 | 51 | |
3.82 | 14.62 | 71 * | ||
5.2 * | 19.2 * | 100 * | ||
5.36 | 20.51 | 139 * | ||
26.85 * | ||||
28.77 | ||||
Length of gearbox(mm) | 30.9 | 37.5 | 44.1 |
* Saliva Analyzer
* Blood Analyzer
* Welding Machine
* Intelligent Security Products
* Fiber Fusion Splicer
* Digital Electronics
Lead time for samples:
Standard motors in stock: within 3 days
Standard motors not in stock: within 15 days
Customized products: About 25~30 days (based on complexity of
customization)
Lead time for building a new mold: generally about 45 days
Lead time for mass production: based on order quantity
Packaging:
Samples are packed in foam sponge with a paper box, shipped by
express
Mass production, motors are packed in corrugated cartons with
transparent film outside. (shipping by air)
If shipped by sea, product will be packed on pallets
On samples and air shipping, we use Fedex/TNT/UPS/DHL. (5~12 days for express service)
For sea shipping, we use our shipping agent, and ship from Shanghai
port. (45~70 days for sea shipping)
1.Are you a manufacturer?
Yes, we are a manufacture, and we produces mainly stepper motors.
2.Where is your factory location? Can we visit your factory?
Our factory is located in Changzhou, Jiangsu. Yes, you are very
welcome to visit us.
3.Can you provide free samples?
No, we don’t provide free samples. Customers won’t treat free
samples fairly.
4.Who pays for shipping cost? Can I use my shipping account?
Customers pay for shipping cost. We will quote you shipping cost.
If you think you have cheaper/more convenient shipping method, we
can use you shipping account.
5.What’s you MOQ? Can I order one motor?
We don’t have MOQ, and you can order only one piece sample.
But we recommend you to order a little bit more, just in case the
motor is damaged during your testing, and you can have a back-up.
6.We are developing a new project, do you provide customization
service? Can we sign a NDA contract?
We have over 20 years of experience in stepper motor industry.
We have developed many projects, we can provide full set
customization from design drawing to production.
We are confident we can give you few advice/suggestions for your
stepper motor project.
If you are worrying about confidential issues, yes, we can sign a
NDA contract.
7.Do you sell drivers? Do you produce them?
Yes, we do sell drivers. They are only suitable for temporary
sample test, not suitable for mass production.
We do not produce drivers, we only produce stepper motors