Home Companies Hunan Micomme Medical Technology Development Co., Ltd.

ICU Non Invasive Ventilation Solution With Max flow 210L/min

Hunan Micomme Medical Technology Development Co., Ltd.
Active Member

Contact Us

[China] country

Address: 8, Lujing Road, High- Tech Zone, Yuelu Changsha, China

Contact name:Ellen He

Inquir Now

Hunan Micomme Medical Technology Development Co., Ltd.

ICU Non Invasive Ventilation Solution With Max flow 210L/min

Country/Region china
City & Province changsha hunan
InquireNow

Product Details

HIGH PERFORMANCE NON-INVASIVE VENTILATION SOLUTION with ST-30H for HOSPITAL USE

 
Description
 

Non-invasive ventilation (NIV) is the delivery of oxygen (ventilation support) via a face mask and therefore eliminating the need of an endotracheal airway. NIV achieves comparative physiological benefits to conventional mechanical ventilation by reducing the work of breathing and improving gas exchange.
 
Non-invasive ventilation (NIV) refers to the provision of ventilatory support through the patient's upper airway using a mask or similar device.

 

Application
 

Better chance of survival: A meta-analysis suggested that NIV improved survival in acute care settings – and that it is more beneficial when applied earlier rather than as a rescue therapy.
 
Reduced risk of infection: The use of NIV instead of mechanical ventilation is associated with a lower risk of nosocomial infections. A study has shown significantly more infectious complications related to the presence of the endotracheal tube.

 


 
Advantage
 

Max flow:210L/min
 
Maximum inspiratory pressure: 30cm H2O
 

Accurate oxygen concentration control, better oxygenation.
Oxygen concentration preset and automatic oxygen control can be directly connected to hyperbaric oxygen (0.3~0.6MPa) with 21~100% oxygen concentration preset. The combination of proportional valve and flow monitoring offers automatic control of constant oxygen concentration.

 


 

 
Specifications
 

ParameterST-30H
Ventilation modeS/T, CPAP, S, T, PC, VAT
Oxygen concentration21%~100%, (increment by 1%)
Screen size5.7 Inch color screen
Waveform displayPressure/flow
IPAP4~30cm H2O
EPAP4~25cm H2O
CPAP4~20cm H2O
Target tidal volume20~2500mL
Backup BPM1~60BPM
Backup time0.2~4.0S
Rise time1~6 level
Ramp time0~60min
Ramp pressureCPAP mode: 4~20cm H2O Other mode: 4~25cm H2O
Pressure relief1~3 level
Spontaneous Timin0.2~4.0S
Spontaneous Timax0.2~4.0S
I-Trigger settingAuto, 1~3 level
E-Trigger settingAuto, 1~3 level
Trigger lockOff, 0.3~1.5S
Flow of HFNC modeN/A
Max flow210L/min
Max leak compensation90L/min
Method of pressure measureThe pressure testing tube is on mask side
AlarmsApnea|Disconnection|Low minute volume|Low tidal volume|Power off|Over high pressure|Oxygen unavailable|Excessive oxygen pressure supply|Low oxygen pressure supply|Pressure tube off|Turbine dysfunction|Oxygen sensor failure|Air flow sensor failure|Low pressure|Low battery|Battery depleted
Apnea alarm range setting0S, 10S, 20S, 30S
Disconnection alarm range setting0S, 15S, 60S
Real-time monitoring dataPresent oxygen concentration|Oxygen source pressure|Pressure|Ventilation per min|Respiratory rate|Current leakage|Current volume|Trigger method
Other settingsScreen lock|Display brightness| Flow|Pressure| Waveform
Backup battery8 hours

 


















Hot Products

HIGH PERFORMANCE HOSPITAL NON-INVASIVE VENTILATION SOLUTION with ST-30H Description Non-invasive ...
HOSPITAL NON-INVASIVE VENTILATOR ST-30H with HIGH PERFORMANCE Description Noninvasive ventilation ...
MICOMME HOSPITAL NON-INVASIVE VENTILATION SOLUTION with ST-30H Description Non-invasive ventilation ...
MICOMME HOSPITAL NON-INVASIVE VENTILATION SOLUTION with ST-30H Description Non-invasive ventilation ...
HIGH PERFORMANCE NON-INVASIVE VENTILATION SOLUTION with ST-30H for HOSPITAL USE Description Non...
MICOMME HIGH PERFORMANCE NON-INVASIVE VENTILATOR ST-30H with AST-PREMIUM TECHNOLOGY Description Non...