Home Companies Hunan Micomme Medical Technology Development Co., Ltd.

Micomme Medical CPAP Mode Non Invasive Ventilator Machine

Active Member

Contact Us

[China]

Address: 8, Lujing Road, High- Tech Zone, Yuelu Changsha, China

Contact name:Ellen He

Hunan Micomme Medical Technology Development Co., Ltd.

Micomme Medical CPAP Mode Non Invasive Ventilator Machine

Country/Region	china
City & Province	changsha hunan

Product Details

HIGH PERFORMANCE NON-INVASIVE VENTILATOR ST-30K

Description

Noninvasive ventilation (NIV) supports the patient's breathing without the need for intubation or a tracheotomy. NIV delivers effective therapy with less risk of infection and improved survival in patients with respiratory failure.

Non-invasive ventilation (NIV) refers to the provision of ventilatory support through the patient's upper airway using a mask or similar device.

Application

Fewer complications: NIV reduces the number of possible complications by 62% and treatment errors by 50%.

Shorter stay in ICU: NIV shortens ICU stay and reduces the length of hospital stay by an average of 3 days.

Increased quality of life: NIV increases the quality of life for patients.

Better chance of survival: A meta-analysis suggested that NIV improved survival in acute care settings – and that it is more beneficial when applied earlier rather than as a rescue therapy.

Advantage

AST-Premium technology will monitor patients’ every single respiration, response immediately to synchronize patients’ breath through sensitivity trigger by detecting flow, pressure and waveform changing.

Automatic-Sensitivity technology provide the doctor convenience no need to set the sensitivity manually, and lower down patient’s respiratory power.
- Trigger sensitivity: support automatic trigger and 3 levels trigger sensitivity adjustment. The lower the trigger sensitivity is, the less work the patient needs to do to trigger, and the easier the ventilator is to trigger.
- Withdraw sensitivity: support automatic withdraw and 3-level withdraw sensitivity adjustment. The lower the sensitivity, the less work patients need to do to remove the ventilator, and the easier it is to remove the ventilator.

Accurate oxygen concentration control, better oxygenation. Oxygen concentration preset and automatic oxygen control can be directly connected to hyperbaric oxygen (0.3~0.6MPa) with 21~100% oxygen concentration preset. The combination of proportional valve and flow monitoring offers automatic control of constant oxygen concentration.

Specifications

Parameter	ST-30K
Ventilation mode	S/T, CPAP, S, T, PC, VAT, HFNC
Oxygen concentration	21%~100%, (increment by 1%)
Screen size	5.7 Inch color screen
Waveform display	Pressure/flow
IPAP	4~40cm H2O
EPAP	4~25cm H2O
CPAP	4~20cm H2O
Target tidal volume	20~2500mL
Backup BPM	1~60BPM
Backup time	0.2~4.0S
Rise time	1~6 level
Ramp time	0~60min
Ramp pressure	CPAP mode: 4~20cm H2O Other mode: 4~25cm H2O
Pressure relief	1~3 level
Spontaneous Timin	0.2~4.0S
Spontaneous Timax	0.2~4.0S
I-Trigger setting	Auto, 1~3 level
E-Trigger setting	Auto, 1~3 level
Trigger lock	Off, 0.3~1.5S
Flow of HFNC mode	10~70L/min
Max flow	300L/min
Max leak compensation	120L/min
Method of pressure measure	The pressure testing tube is on mask side
Alarms	Apnea\|Disconnection\|Low minute volume\|Low tidal volume\|Power off\|Over high pressure\|Oxygen unavailable\|Excessive oxygen pressure supply\|Low oxygen pressure supply\|Pressure tube off\|Turbine dysfunction\|Oxygen sensor failure\|Air flow sensor failure\|Low pressure\|Low battery\|Battery depleted
Apnea alarm range setting	0S, 10S, 20S, 30S
Disconnection alarm range setting	0S, 15S, 60S
Real-time monitoring data	Present oxygen concentration\|Oxygen source pressure\|Pressure\|Ventilation per min\|Respiratory rate\|Current leakage\|Current volume\|Trigger method
Other settings	Screen lock\|Display brightness\| Flow\| Pressure\| Waveform\| Event summary
Backup battery	8 hours