Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYL-M861C-000 / 23D10009 / 6301414539 ACCESSORY SV Hitachi Smt Spare Parts for Hitachi Machine
| Part No | 630 141 4539 23D10009 KYL-M861C-000 |
| Part Name | ACCESSORY SV |
| Condition | Original New |
| Brand Name | SMC |
| Usage | SMT Hitachi machine |
| Type | SMT Hitachi machine Parts |
Hot sale stock list:
| GUIDE LINER ASSY. | KYL-M866D-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| DRIVER | N510002593AA |
| SPRING_COMP | KYD-MCN41-000 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| COVER(RB) | KYD-MC10L-000 |
| GEAR | KYD-MC153-00 |
| ASSY,LEVER | KYM-M864H-000 |
| BLOCK | KYF-M867D-000 |
| ASSY,LEVER | KYM-M8648-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| SPRING COMP | KYD-MC13T-000 |
| LEVER | KYB-M3T21-000 |
| NPM 230C NOZZLE | N610040784AD |
| SPRING_COMP | KYD-MC129-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| SPRING_COMP | KYB-M91CS-000 |
| LINE-SENSOR | KYF-M8607-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| GEAR | KYU-M868B-000 |
| VALVE | 2-673-684-01 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| GEAR | KYD-MC424-000/223E0481 |
| BUSH,BEARING | KYB-M3T3R-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| SEAL | KYB-M704E-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| GRIP | KYD-MC109-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| HNS,CORD | KYL-M8621-000 |
| NPM FILTER | N610097899AA |
| CASE-CONN | KYF-M860Y-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| CYLINDER | KYL-M869A-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| NOZZLE(HB04C) | KYB-M7721-100 |
| GREASE | N990PANA-023 |
| YG12 BELT | KHY-M9129-10 |
| PIPE FITTING | 630 048 4656 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| NPM 235C NOZZLE | N610043814AD |
| WASHER | KYD-MC22H-00 |
| ETC MOTOR | PK2K93S-2D |
| NOZZLE_HV14C | KYA-M7714-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| NPM X479 VALVE | N510054843AA |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| HOLDER | KYB-M702F-000/0916DK2D |
| CASE-CONN | KYK-M860Y-000 |
| PIN,HINGE | KYL-M860R-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| SEAL | KYT-M862W-000 |
| COVER(LB) | KYM-M8657-000 |
| FEEDER CABLE | KYL-M869D-000 |
| GEAR | KYD-MC20K-00 |
| 904 NOZZLE | Y074-V904-0015 |
| BM02 NOZZLE | BM02 |
| POGO BLOCK | 0738A-0029 |
| GUIDE,LINEAR | LWHD12X3 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| WASHER | 92902-03200 |
| COVER | KYM-M860X-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| DSP-2008K SQUEEGE | L:20CM |
| GEAR | KYK-M864C-000 |
| BELT | N510065133AA |
| NOZZLE_HG33C | KYA-M7703-000 |
| 933 NOZZLE | 00346523-03 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| SONY NOZZLE | CF25200 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| ASSY_CABLE | KYL-M86NC-000 |
| KIC ON BOARD | 6-10 CHANEL |
| PLATE | KYA-M3804-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| YG12F BELT | KHY-M9129-00 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| ASSY,HOOK | KYD-MC40A-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| RT BELT | 3-212-264-01 |
| BELT | N510021326AA |
| NPM 230CS NOZZLE | N610040788AD |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| ARM STEEL | N210007284AB |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| VALVE | 4-187-212-01 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| SPRING | P/N:0730C-0252 |
| NPM H16 SENSON | N510054833AA |
| LIGHTING_UNIT | KYB-M700T-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| BELT | 6*3080*0.9 mm |
| BELT | N510060977AA |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| GXH-1 FILTER | KYL-M860S-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| VALVE | SY3240-5LZD |
| SENSOR | KYF-M8681-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| POWER SUPPLY | 11632XA |
| NPM H16 SHAFT | N510064335AA |
| NPM 226CS NOZZLE | N610040783AB |
| NOZZLE_HG82C | KYA-M7708-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| Encoder Read Head For Universal | 49566101 |
| DD MOTOR | KYF-M860E-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| LEVER | KYK-M861V-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| PIN-GAUGE | KXF00YHUA00 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| 234F NOZZLE | 45466931 |
| GUIDE,LINEAR | KYF-M867P-000 |
| GEAR | 4-719-921-02 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| PIN,HINGE | KYB-M3T31-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| ACCESSORY,SV | KYL-M861C-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| ASSY GRIP | KYD-MC21H-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| Fuji Packing | PH00991 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| WASHER | 90990-37J010 |
| MICRO METER | 350-251-30 |
| UNIT,I/O | KYL-M86LV-000 |
| FILTER | K46-M8527-COX |
| GUIDE | KYD-MC11T-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| TIMING BELT | KYB-M919E-000 |
| FAN | 1204KL-04W-B59 |
| BUSH,BEARING | KYB-M3T3S-000 |
| BELT | 44548605 |
| COUPLING | KYK-M86AW-000 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| LEVER | KYB-M3T22-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| PIN_LOCATE | KYD-MC132-000 |
| SLIP RING | KYB-M7027-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| POWER SUPPLY | 1-474-020-11 |
| TOOL | N510031628AA |
| 937 NOZZLE | 00322591-06 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| CAM_FOLLOWER | KYA-M912N-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| NPM 240C NOZZLE | N610062681AD |
| ASSY_GEAR | KYD-MC412-000 |
| CORD,BCR | KYF-M86NC-000 |
| HOLDER | KYB-M701R-000 |
| FUSE | KYL-M86KH-000 |
| PIN_HINGE | KYD-MC41U-000 |
| SONY1000 FILTER | 4-761-920-01 |
| SENSOR,PELEC | KYL-M86HL-000 |
| PIN_HINGE | KYD-MC42S-000 |
| HELICAL SPRING | N210068065AA |
| SPRING COMP | KYD-MC422-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| WASHER | 92902-03100 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| B-234 NOZZLE | 47561103-B-234 |
| NOZZLE | HG53G |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| SENSOR-PELEC | KYK-M861Y-000 |
| PIN-GAUGE | KXF00YHTA00 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| BRACKET | KYL-M86KD-000/211FC709 |
| HNS,LIGHTING | KYF-M861W-000 |
| GEAR | KYD-MC23C-00 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| 1220 NOZZLE | 51305323 |
| PIN_LOCATE | KYD-MC137-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| BELT TIMING | KYA-M9152-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| Fuji Filter | AA1FZ04 |
| NOZZLE_HV13C | KYA-M7713-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| BALL | 4-719-920-01 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| BOTTON | ZB6-EB3B |
| COVER | KYK-M86RD-000 |
| 360F NOZZLE | 45466917 |
| NPM 235CS NOZZLE | N610043815AA |
| ROLLER(B) | KYK-M86EM-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| BLOCK | KYL-M86KC-000/211G5472 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| GEAR | KYD-MC21U-000 |
| PLATE | N610014970AE |
| CAM FOLLOWER | KYB-M704A-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| 340F NOZZLE | 45466934 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| PCBA FIXTURE | FC150-130-60 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| FFU | MX--575-A |
| SEAL | KYB-M702B-000 |
| COUPLING | KYB-M7116-000 |
| LEVER | KYB-M3T0M-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| LEVER | KYK-M86LV-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| SDD Hard Disk | N610059692AA |
| ASSY_TENSION | KYD-MC21N-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| COVER ASSY | X-4700-067-4 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| BELT_TIMING | KYA-M914W-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| BELT | 6*3080*0.9 mm |
| LEVER | KYB-M3T33-000 |
| COUPLING | KYB-M702C-000 |
| ASSY_LEVER | KYD-MC212-000 |
| ASSY GEAR | KYD-MC211-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| SPRING_COMP | KYD-MC3T-000 |
| MOTOR | KYA-M700R-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| CPK JG0250 | CPK JG0250 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| GXH SPECIAL NOZZLE | 13053 |
| LEVER | KYB-M3T01-000 |
| BELT | 00334936S01 |
| FEEDER | GD38080 |
| VALVE | SY3120-MZD-C6-F2 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| 935 NOZZLE | 00346524-03 |
| PIN,HINGE | KYD-MC41S-000 |
| GREASE FOR PANASONIC | N510048188AA |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| ASSY,GEAR | KYM-M862C-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| 938 NOZZLE | 00322592-05 |
| MACHINE SCREW | KYD-MC14G-000 |
| ROCK | 2-149-675-01 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| PIN,LOCATE | KYD-MCN3N-000 |
| BLOCK | KYA-M7027-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| DISK | KYB-M3T1A-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| SONY NOZZEL AF12082 | AF12082 |
| UNIT_DRIVER | KYK-M860F-000 |
| SONY NOZZEL | AF10071 |
| PCB-MOUNT | KYK-M861W-000 |
| BLOCK L3 | KYB-M960C-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| COVER(RB) | KYM-M8612-000 |
| NPM H8 SENSON | N510048691AA |
| SLIP RING | KYB-M7027-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
