Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYB-M7027-000 / 0916D30T SLIP RING Hitachi Smt Spare Parts for SIGMA / GXH
| Part No | KYB-M7027-000/0916D30T |
| Part Name | SLIP RING |
| Condition | Compatible new / Original new |
| Usage | Hitachi Sigma / GXH machine |
| Type | Hitachi Smt part |
Hot sale stock list:
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| BELT | N510065133AA |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| PLATE | KYA-M3804-000 |
| COVER | KYM-M860X-000 |
| GREASE | N990PANA-023 |
| LEVER | KYK-M861V-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| ASSY_GEAR | KYD-MC40F-000 |
| CPK JG0250 | CPK JG0250 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| COVER | KYK-M86RD-000 |
| LEVER | KYB-M3T01-000 |
| COUPLING | KYK-M86AW-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| DEK SQUEEGE | DEK-03T 长25CM |
| GEAR | KYD-MC424-000/223E0481 |
| NPM H16 SHAFT | N510064335AA |
| COVER(MAK1-2) | KYD-MC11X-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| GREASE FOR PANASONIC | N510048188AA |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| FEEDER | GD38080 |
| BELT TIMING | KYA-M9152-000 |
| POGO BLOCK | 0738A-0029 |
| SONY1000 FILTER | 4-761-920-01 |
| RT BELT | 3-212-264-01 |
| P_RCG_SCOPE | KYB-M730B-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| DISK | KYB-M3T1A-000 |
| PIN-GAUGE | KXF00YHUA00 |
| ASSY,GEAR | KYM-M862C-000 |
| PIN,HINGE | KYB-M3T31-000 |
| LEVER | KYK-M86LV-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| WASHER | KYD-MC22H-00 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| GUIDE,LINEAR | LWHD12X3 |
| I/O CABLE,WIDE | 0938A-1007 |
| CAM_FOLLOWER | KYA-M912N-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| YG12F BELT | KHY-M9129-00 |
| COVER(LB) | KYM-M8657-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| BM02 NOZZLE | BM02 |
| NPM 235C NOZZLE | N610043814AD |
| GXH-1 FILTER | KYL-M860S-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| WASHER | 92902-03100 |
| PIN,HINGE | KYD-MC41S-000 |
| NPM FILTER | N610097899AA |
| SEAL | KYT-M862W-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| NPM 240C NOZZLE | N610062681AD |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| FUSH-SPECIAL | KYF-M860F-000 |
| MOTOR_DC | KYD-MC410-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| BLOCK | KYL-M86KC-000/211G5472 |
| UNIT_DRIVER | KYK-M860F-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| WASHER | 92902-03200 |
| BRACKET | KYL-M86KD-000/211FC709 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| ASSY,SPROCKET | KYM-M862A-000 |
| PIN-GAUGE | KXF00YHTA00 |
| PCBA FIXTURE | FC150-130-60 |
| ASSY,LEVER | KYM-M864H-000 |
| NPM H16 SENSON | N510054833AA |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| HNS,LIGHTING | KYF-M861W-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| SEAL | KYB-M704E-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| BELT | 6*3080*0.9 mm |
| TOOL | N510031628AA |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| BLOCK L3 | KYB-M960C-000 |
| PLATE | N610014970AE |
| SENSOR | KYF-M8681-000 |
| 340F NOZZLE | 45466934 |
| LIGHTING_UNIT | KYB-M700T-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| NPM X479 VALVE | N510054843AA |
| Fuji Packing | PH00991 |
| SPRING_COMP | KYD-MCN41-000 |
| BALL | 4-719-920-01 |
| CORD,BCR | KYF-M86NC-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| CASE-CONN | KYF-M860Y-000 |
| FAN | 1204KL-04W-B59 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| KIC ON BOARD | 6-10 CHANEL |
| PIN_LOCATE | KYD-MC137-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| NPM 226CS NOZZLE | N610040783AB |
| DSP-2008K SQUEEGE | L:20CM |
| NPM 230CS NOZZLE | N610040788AD |
| NPM 230C NOZZLE | N610040784AD |
| GEAR | KYD-MC23C-000/6301352305 |
| 935 NOZZLE | 00346524-03 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| COUPLING | KYB-M702C-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| Encoder Read Head For Universal | 49566101 |
| SONY NOZZEL AF12082 | AF12082 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| ASSY,LEVER | KYM-M8648-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| ROLLER(B) | KYK-M86EM-000 |
| FEEDER CABLE | KYL-M869D-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| TIMING BELT | KYB-M919E-000 |
| PIN_HINGE | KYD-MC41U-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| BOLT-HEX-SCT | 90990-01J115 |
| 938 NOZZLE | 00322592-05 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| LEVER | KYB-M3T21-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| ARM STEEL | N210007284AB |
| LEVER(SUP) | KYD-MC20D-000 |
| SONY NOZZEL | AF10071 |
| BELT | N510060977AA |
| UNIT,DRIVER | KYK-M860K-000 |
| PIPE FITTING | 630 048 4656 |
| SPRING COMP | KYD-MC13T-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| GUIDE,LINEAR | KYF-M867P-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| ASSY_LEVER | KYD-MC212-000 |
| 360F NOZZLE | 45466917 |
| 234F NOZZLE | 45466931 |
| GXH SPECIAL NOZZLE | 13053 |
| ACCESSORY,SV | KYL-M861C-000 |
| SPRING COMP | KYD-MC422-000 |
| GEAR | 4-719-921-02 |
| GRIP | KYD-MC109-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| COVER ASSY | X-4700-067-4 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| LEVER | KYB-M3T22-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| SPRING | P/N:0730C-0252 |
| BELT | 00200341-01 |
| ASSY_GEAR | KYD-MC412-000 |
| MOTOR | KYA-M700R-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| GEAR | KYD-MC23C-00 |
| SLIP RING | KYB-M7027-000 |
| BELT | 00334936S01 |
| SEAL | KYB-M702B-000 |
| GEAR | KYD-MC153-00 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| BELT | N510021326AA |
| MICRO METER | 350-251-30 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| SENSOR,PELEC | KYL-M86HL-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| GEAR | KYU-M868B-000 |
| COUPLING | KYB-M7116-000 |
| CYLINDER | KYL-M869A-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| GEAR | KYK-M864C-000 |
| VALVE | SY3240-5LZD |
| GEAR | KYD-MC21U-000 |
| VALVE | SY3120-MZD-C6-F2 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| BLOCK | KYA-M7027-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| FILTER | K46-M8527-COX |
| NOZZLE_HG33C | KYA-M7703-000 |
| Fuji Filter | AA1FZ04 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| SPRING_COMP | KYD-MC3T-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| WASHER | 90990-37J010 |
| HOLDER | KYB-M701R-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| BELT | 6*3080*0.9 mm |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| POWER SUPPLY | 11632XA |
| NOZZLE(FA06) | KYB-M77F6-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| TAIL PIVOT | P/N:0740C-0109 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| HV31 NOZZLE | KYL-M7718-000 |
| ASSY GEAR | KYD-MC211-000 |
| LEVER | KYB-M3T0M-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| NPM H8 SENSON | N510048691AA |
| SPRING_COMP | KYD-MC129-000 |
| POWER SUPPLY | 1-474-020-11 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| GERA(HASUBA) | KYD-MC131-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| DRIVER | N510002593AA |
| FUSE | KYL-M86KH-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| BELT | 44548605 |
| BLOCK | KYF-M867D-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| LEVER | KYB-M3T33-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| HELICAL SPRING | N210068065AA |
| CASE-CONN | KYK-M860Y-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| 904 NOZZLE | Y074-V904-0015 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| UNIT,I/O | KYL-M86LV-000 |
| ASSY GRIP | KYD-MC21H-000 |
| SONY NOZZLE | CF25200 |
| COVER(RB) | KYM-M8612-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| PIN_LOCATE | KYD-MC132-000 |
| SLIP RING | KYB-M7027-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| BELT_TIMING | KYA-M914W-000 |
| NPM 185 NOZZLE | N610070338AB |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| GUIDE | KYD-MC11T-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| ROCK | 2-149-675-01 |
| FFU | MX--575-A |
| HNS,CORD | KYL-M8621-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| VALVE | 4-187-212-01 |
| PIN_HINGE | KYD-MC42S-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| VALVE | 2-673-684-01 |
| YG12 BELT | KHY-M9129-10 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| 933 NOZZLE | 00346523-03 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| PCB-MOUNT | KYK-M861W-000 |
| DD MOTOR | KYF-M860E-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| SDD Hard Disk | N610059692AA |
| PIN,HINGE | KYB-M3T2Y-000 |
| GEAR | KYD-MC20K-00 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| BOTTON | ZB6-EB3B |
| NPM 235CS NOZZLE | N610043815AA |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| SPRING_COMP | KYB-M91CS-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| 1220 NOZZLE | 51305323 |
| ETC MOTOR | PK2K93S-2D |
| CAM FOLLOWER | KYB-M704A-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| NOZZLE | HG53G |
| B-234 NOZZLE | 47561103-B-234 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| COVER(RB) | KYD-MC10L-000 |
| PIN,HINGE | KYL-M860R-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| 937 NOZZLE | 00322591-06 |
| LINE-SENSOR | KYF-M8607-000 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
