Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
630 128 6921 KYL-M860X-000 Holder Hitachi Smt Spare Parts for GXH Machine
| Part No | KYL-M860X-000,6301286921 |
| Part Name | Holder |
| Condition | Compatible new |
| Material | AL |
| Usage | Smt Hitachi Machine |
| Type | Smt Hitachi Machine Parts |
Hot Sale stock list as below:
| SONY E1000 FILTER | 4-761-920-01 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| ROCK | 2-149-675-01 |
| FAN | 1204KL-04W-B59 |
| ARM STEEL | N210007284AB |
| GXH SPECIAL NOZZLE | 13053 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| FEEDER | GD38080 |
| ASSY_SHAFT | KYF-M8651-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| FEEDER CABLE | KYL-M869D-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| NPM 230CS NOZZLE | N610040788AD |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| LEVER | KYB-M3T22-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| GEAR | KYD-MC23C-000/6301352305 |
| Fuji Packing | PH00991 |
| GT38080 FEEDER | GT38080 FEEDER |
| 935 NOZZLE | 00346524-03 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| COVER ASSY | X-4700-067-4 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| WASHER | 92902-03100 |
| GUIDE,LINEAR | LWHD12X3 |
| 938 NOZZLE | 00322592-05 |
| Encoder Read Head For Universal | 49566101 |
| PULLEY_TIMING | KYB-M91AL-000 |
| LEVER | KYB-M3T21-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| KIC ON BOARD | 6-10 CHANEL |
| SHROUDED POGO BLOCK | 0938A-0007 |
| SPRING_COMP | KYD-MC129-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| WASHER | 90990-37J010 |
| HNS,CORD | KYL-M8621-000 |
| GEAR | 4-719-921-02 |
| FILTER | K46-M8527-COX |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| PIN_LOCATE | KYD-MC21Y-000 |
| COVER | KYK-M86RD-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| FUSE | KYL-M86KH-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| POWER SUPPLY | 1-474-020-11 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| HNS,LIGHTING | KYF-M861W-000 |
| SLIP RING | KYB-M7027-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| HELICAL SPRING | N210068065AA |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| POGO BLOCK | 0738A-0029 |
| PIN,HINGE | KYB-M3T31-000 |
| HOLDER | KYB-M701R-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| SPRING COMP | KYD-MC13T-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| ASSY_GEAR | KYD-MC412-000 |
| BELT | 6*3080*0.9 mm |
| BLOCK | KYA-M7027-000 |
| BM02 NOZZLE | BM02 |
| FUSH-SPECIAL | KYF-M860F-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| COVER | KYM-M860X-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| 937 NOZZLE | 00322591-06 |
| ASSY_GEAR | KYD-MC40F-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| NOZZLE_HV13C | KYA-M7713-000 |
| MICRO METER | 350-251-30 |
| CASE-CONN | KYF-M860Y-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| SENSOR | KYF-M8681-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| GEAR | KYD-MC21U-000 |
| BELT | N510021326AA |
| GREASE GUN KH-35 | KXF08V7AA00 |
| SEAL | KYB-M704E-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| SONY NOZZEL AF12082 | AF12082 |
| BOLT-HEX-SCT | 90990-01J115 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| BELT TIMING | KYA-M9152-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| VALVE | SY3120-MZD-C6-F2 |
| P_RCG_SCOPE | KYB-M730B-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| LEVER | KYB-M3T0M-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| BELT | N510060977AA |
| SPRING | P/N:0730C-0252 |
| ETC MOTOR | PK2K93S-2D |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| PIN_LOCATE | KYD-MC137-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| NPM 235CS NOZZLE | N610043815AA |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| PIN_HINGE | KYD-MC41U-000 |
| NPM H8 SENSON | N510048691AA |
| ASSY GRIP | KYD-MC21H-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| NOZZLE_HG82C | KYA-M7708-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| 933 NOZZLE | 00346523-03 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| BELT | 6*3080*0.9 mm |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| SEAL | KYT-M862W-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| 1220 NOZZLE | 51305323 |
| ASSY,HOOK | KYD-MC40A-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| NOZZLE_HV14C | KYA-M7714-000 |
| COUPLING | KYK-M86AW-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| NPM 226CS NOZZLE | N610040783AB |
| PIN,LOCATE | KYD-MCN3N-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| ROLLER(B) | KYK-M86EM-000 |
| 360F NOZZLE | 45466917 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| SPRING_COMP | KYD-MCN41-000 |
| GUIDE | KYD-MC11T-000 |
| GEAR | KYD-MC153-00 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| PIPE FITTING | 630 048 4656 |
| SONY1000 FILTER | 4-761-920-01 |
| PIN,HINGE | KYB-M3T2Y-000 |
| LEVER | KYK-M86LV-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| SPRING_COMP | KYB-M91CS-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| GRIP | KYD-MC109-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| LEVER | KYK-M861V-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| COVER(RB) | KYM-M8612-000 |
| PCB-MOUNT | KYK-M861W-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| CAM_FOLLOWER | KYA-M912N-000 |
| VALVE | 4-187-212-01 |
| SHAFT ASSY. | KYF-M864U-000 |
| PCBA FIXTURE | FC150-130-60 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| NPM 235C NOZZLE | N610043814AD |
| NPM FILTER | N610097899AA |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| ASSY,LEVER | KYM-M8648-000 |
| NOZZLE | HG53G |
| NPM H16 SENSON | N510054833AA |
| LEVER(SUP) | KYD-MC20D-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| CPK JG0250 | CPK JG0250 |
| ASSY_TENSION | KYD-MC21N-000 |
| GEAR | KYD-MC20K-00 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| CASE-CONN | KYK-M860Y-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| SLIP RING | KYB-M7027-000 |
| BLOCK L3 | KYB-M960C-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| NPM 230C NOZZLE | N610040784AD |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| DEK SQUEEGE | DEK-03T 长25CM |
| FFU | MX--575-A |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| ASSY_CABLE | KYL-M86NC-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| PIN,HINGE | KYD-MC41S-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| NPM H16 SHAFT | N510064335AA |
| VALVE | 2-673-684-01 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| TIMING BELT | KYB-M919E-000 |
| SPRING_COMP | KYD-MC3T-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| DRIVER | N510002593AA |
| NPM 240C NOZZLE | N610062681AD |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| PIN-GAUGE | KXF00YHUA00 |
| SENSOR,PELEC | KYL-M86HL-000 |
| SPRING COMP | KYD-MC422-000 |
| MOTOR | KYA-M700R-000 |
| BELT | 44548605 |
| BELT_TIMING | KYA-M914W-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| GREASE | N990PANA-023 |
| 904 NOZZLE | Y074-V904-0015 |
| BALL | 4-719-920-01 |
| ASSY,GEAR | KYM-M862C-000 |
| WASHER | KYD-MC22H-00 |
| POWER SUPPLY | 11632XA |
| SEAL | KYB-M702B-000 |
| COUPLING | KYB-M702C-000 |
| B-234 NOZZLE | 47561103-B-234 |
| WASHER | 92902-03200 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| PIN-GAUGE | KXF00YHTA00 |
| DD MOTOR | KYF-M860E-000 |
| COUPLING | KYB-M7116-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| GEAR | KYD-MC23C-00 |
| PIN_LOCATE | KYD-MC132-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| LINE-SENSOR | KYF-M8607-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| BLOCK | KYF-M867D-000 |
| YG12F BELT | KHY-M9129-00 |
| GEAR | KYU-M868B-000 |
| YG12 BELT | KHY-M9129-10 |
| 340F NOZZLE | 45466934 |
| CYLINDER | KYL-M869A-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| ASSY_LEVER | KYD-MC212-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| PIN_HINGE | KYD-MC42S-000 |
| TOOL | N510031628AA |
| LEVER | KYB-M3T01-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| COVER(RB) | KYD-MC10L-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| 234F NOZZLE | 45466931 |
| COVER(LB) | KYM-M8657-000 |
| ASSY GEAR | KYD-MC211-000 |
| SDD Hard Disk | N610059692AA |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| GEAR | KYK-M864C-000 |
| PLATE | N610014970AE |
| HV31 NOZZLE | KYL-M7718-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| VALVE | SY3240-5LZD |
| AIR_LINE_EQPT | KYB-M704D-000 |
| DISK | KYB-M3T1A-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| MOTOR_DC | KYD-MC410-000 |
| CORD,BCR | KYF-M86NC-000 |
| PIN,HINGE | KYL-M860R-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| NPM 185 NOZZLE | N610070338AB |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| BUCK_UP_PIN | KYA-M3802-000 |
| SONY NOZZLE | CF25200 |
| NPM X479 VALVE | N510054843AA |
| NOZZLE(VC74) | KYK-M7725-000 |
| UNIT,I/O | KYL-M86LV-000 |
| SONY NOZZEL | AF10071 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| GEAR | KYD-MC424-000/223E0481 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| SONY MOTHER BOARD | 1-797-651-12 |
| Fuji Filter | AA1FZ04 |
| ASSY,LEVER | KYM-M864H-000 |
| LEVER | KYB-M3T33-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| RT BELT | 3-212-264-01 |
| SENSOR-PELEC | KYK-M861Y-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| I/O CABLE,WIDE | 0938A-1007 |
| COGNEX BOARD | KYK-M86PW-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| BELT | N510065133AA |
| BOTTON | ZB6-EB3B |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| DSP-2008K SQUEEGE | L:20CM |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| GREASE FOR PANASONIC | N510048188AA |
| SENSOR,PELEC | KYK-M86DE-000 |
| PLATE | KYA-M3804-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| BELT | 00334936S01 |
| ACCESSORY,SV | KYL-M861C-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
