Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYL-M8619-000,6301366906,212A2219 Guide Hitachi Smt Spare Parts for Hitachi GXH Machine
| Part No | KYL-M8619-000,6301366906,212A2219 |
| Part Name | Guide |
| Condition | Compatible new |
| Material | Ptfe |
| Usage | Smt Hitachi Machine |
| Type | Smt Hitachi Machine Parts |
Hot sale stock list:
| GERA(HASUBA) | KYD-MC131-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| SPRING_COMP | KYD-MC129-000 |
| FEEDER CABLE | KYL-M869D-000 |
| LEVER | KYB-M3T22-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| MACHINE SCREW | KYD-MC14G-000 |
| NOZZLE | HG53G |
| SPRING_COMP | KYB-M91CS-000 |
| ASSY_LEVER | KYD-MC212-000 |
| B-234 NOZZLE | 47561103-B-234 |
| 360F NOZZLE | 45466917 |
| 937 NOZZLE | 00322591-06 |
| ROCK | 2-149-675-01 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| FUSE | KYL-M86KH-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| COVER(RB) | KYM-M8612-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| PIN,HINGE | KYB-M3T31-000 |
| BELT_TIMING | KYA-M914W-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| TAIL PIVOT | P/N:0740C-0109 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| NPM H16 SENSON | N510054833AA |
| SONY1000 FILTER | 4-761-920-01 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| DRIVER | N510002593AA |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| NPM 235CS NOZZLE | N610043815AA |
| Encoder Read Head For Universal | 49566101 |
| WASHER | 90990-37J010 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| GXH SPECIAL NOZZLE | 13053 |
| GEAR | KYD-MC23C-00 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| VALVE | SY3120-MZD-C6-F2 |
| FUSH-SPECIAL | KYF-M860F-000 |
| BELT | N510021326AA |
| CORD,BCR | KYF-M86NC-000 |
| PCB-MOUNT | KYK-M861W-000 |
| PIN_LOCATE | KYD-MC132-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| SONY NOZZLE | CF25200 |
| SPRING | P/N:0730C-0252 |
| PIN_HINGE | KYD-MC41U-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| BELT | N510065133AA |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| SPRING_COMP | KYD-MCN41-000 |
| ASSY,LEVER | KYM-M864H-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| NOZZLE_HV19C | KYA-M7719-000 |
| 933 NOZZLE | 00346523-03 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| SONY E1000 FILTER | 4-761-920-01 |
| FAN | 1204KL-04W-B59 |
| COGNEX BOARD | KYK-M86PW-000 |
| 340F NOZZLE | 45466934 |
| FILTER | K46-M8527-COX |
| SPRING_COMP | KYD-MC3T-000 |
| 234F NOZZLE | 45466931 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| LIGHTING_UNIT | KYB-M700T-000 |
| GREASE FOR PANASONIC | N510048188AA |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| 938 NOZZLE | 00322592-05 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| SENSOR | KYF-M8681-000 |
| HOLDER | KYB-M701R-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| COUPLING | KYK-M86AW-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| CYLINDER | KYL-M869A-000 |
| LEVER | KYB-M3T21-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| ASSY GEAR | KYD-MC211-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| 935 NOZZLE | 00346524-03 |
| PIN,HINGE | KYD-MC41S-000 |
| SDD Hard Disk | N610059692AA |
| BLOCK | KYA-M7027-000 |
| PIN-GAUGE | KXF00YHTA00 |
| PIPE FITTING | 630 048 4656 |
| NPM 185 NOZZLE | N610070338AB |
| PIN-GAUGE | KXF00YHUA00 |
| SONY NOZZEL AF12082 | AF12082 |
| HNS,CORD | KYL-M8621-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| PIN_HINGE | KYD-MC42S-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| HV31 NOZZLE | KYL-M7718-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| UNIT,I/O | KYL-M86LV-000 |
| FEEDER | GD38080 |
| ROLLER(B) | KYK-M86EM-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| PLATE | N610014970AE |
| POWER SUPPLY | 1-474-020-11 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| WASHER | 92902-03200 |
| GUIDE,LINEAR | KYK-M860S-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| BELT TIMING | KYA-M9152-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| NOZZLE_HG33C | KYA-M7703-000 |
| GREASE | N990PANA-023 |
| ASSY GRIP | KYD-MC21H-000 |
| BELT | 44548605 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| ASSY_TENSION | KYD-MC21N-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| GEAR | KYU-M868B-000 |
| Fuji Packing | PH00991 |
| SENSOR-PELEC | KYK-M861Y-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| WASHER | 92902-03100 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| NPM 230C NOZZLE | N610040784AD |
| GUIDE,LINEAR | KYK-M86KY-000 |
| NPM FILTER | N610097899AA |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| ASSY,GEAR | KYM-M862C-000 |
| ETC MOTOR | PK2K93S-2D |
| ASSY,LEVER | KYM-M8648-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| MOTOR | KYA-M700R-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NPM 226CS NOZZLE | N610040783AB |
| BM02 NOZZLE | BM02 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| VALVE | SY3240-5LZD |
| PLATE | KYA-M3804-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| COVER | KYM-M860X-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| SEAL | KYB-M704E-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| BLOCK L3 | KYB-M960C-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| BELT | N510060977AA |
| CASE-CONN | KYF-M860Y-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| DSP-2008K SQUEEGE | L:20CM |
| BRACKET | KYL-M86KD-000/211FC709 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| LEVER | KYB-M3T01-000 |
| COVER(RB) | KYD-MC10L-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| GUIDE,LINEAR | LWHD12X3 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| NOZZLE(VC74) | KYK-M7725-000 |
| GEAR | KYK-M864C-000 |
| WASHER | KYD-MC22H-00 |
| UNIT_DRIVER | KYK-M860F-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| SEAL | KYT-M862W-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| PIN_LOCATE | KYD-MC137-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| SLIP RING | KYB-M7027-000 |
| SPRING COMP | KYD-MC422-000 |
| GEAR | KYD-MC153-00 |
| LEVER(SUP) | KYD-MC20D-000 |
| NPM H16 SHAFT | N510064335AA |
| DD MOTOR | KYF-M860E-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| 904 NOZZLE | Y074-V904-0015 |
| NPM 235C NOZZLE | N610043814AD |
| BELT | 6*3080*0.9 mm |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| CAM FOLLOWER | KYB-M704A-000 |
| COUPLING | KYB-M7116-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| LEVER | KYB-M3T33-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| NPM H8 SENSON | N510048691AA |
| POWER SUPPLY | 11632XA |
| SHROUDED POGO BLOCK | 0938A-0007 |
| P_RCG_SCOPE | KYB-M730B-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| UNIT,DRIVER | KYK-M860K-000 |
| BOTTON | ZB6-EB3B |
| VALVE | 4-187-212-01 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| SEAL | KYB-M702B-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| CASE-CONN | KYK-M860Y-000 |
| TOOL | N510031628AA |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| ASSY,SPROCKET | KYM-M862A-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| SONY NOZZEL | AF10071 |
| ACCESSORY,SV | KYL-M861C-000 |
| CPK JG0250 | CPK JG0250 |
| FFU | MX--575-A |
| SENSOR,PELEC | KYL-M8609-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| MICRO METER | 350-251-30 |
| NPM 240C NOZZLE | N610062681AD |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| GEAR | KYD-MC20K-00 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| LEVER | KYK-M86LV-000 |
| GEAR | KYD-MC424-000/223E0481 |
| LEVER | KYK-M861V-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| CAM_FOLLOWER | KYA-M912N-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| VALVE | 2-673-684-01 |
| SHAFT ASSY. | KYF-M864U-000 |
| GEAR | 4-719-921-02 |
| NPM 230CS NOZZLE | N610040788AD |
| NOZZLE_HG52C | KYA-M7705-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| COVER | KYK-M86RD-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| POGO BLOCK | 0738A-0029 |
| BELT | 00334936S01 |
| SLIP RING | KYB-M7027-000 |
| BALL | 4-719-920-01 |
| ASSY_SHAFT | KYF-M8651-000 |
| GEAR | KYD-MC21U-000 |
| ASSY_GEAR | KYD-MC412-000 |
| GUIDE | KYD-MC11T-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| COVER ASSY | X-4700-067-4 |
| DISK | KYB-M3T1A-000 |
| KIC ON BOARD | 6-10 CHANEL |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| MOTOR_DC | KYD-MC410-000 |
| YG12F BELT | KHY-M9129-00 |
| LINE-SENSOR | KYF-M8607-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| ASSY,HOOK | KYD-MC40A-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| GUIDE,LINEAR | KYF-M867P-000 |
| COUPLING | KYB-M702C-000 |
| HELICAL SPRING | N210068065AA |
| COVER(LB) | KYM-M8657-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| BLOCK | KYF-M867D-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| PCBA FIXTURE | FC150-130-60 |
| ARM STEEL | N210007284AB |
| RT BELT | 3-212-264-01 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| TIMING BELT | KYB-M919E-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| Fuji Filter | AA1FZ04 |
| PIN,HINGE | KYL-M860R-000 |
| GRIP | KYD-MC109-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| LEVER | KYB-M3T0M-000 |
| BELT | 6*3080*0.9 mm |
| NOZZLE_HV13C | KYA-M7713-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| SPRING COMP | KYD-MC13T-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| NPM X479 VALVE | N510054843AA |
| 1220 NOZZLE | 51305323 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| YG12 BELT | KHY-M9129-10 |
| HOLDER | KYB-M702F-000/0916DK2D |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
