|
[China]
Trade Verify
Address: Room 1608 Dingye International Mansion, No. 54 Moscow Road, Qingdao Free Trade Zone, China
Contact name:Michelle Zhang
Qingdao Florescence Marine Supply Co., LTD. |
|
Verified Suppliers
|
|
|
Ship Launching Airbags
1. Material: Natural Rubber and Nylon Cord
2. Fittings: Inflation Valve, Pressure Gauge, Pulling Ring
3. Layers Range: 3-12 Layers
4. Size Range: Dia 0.6-2.8m, Len 5.0-25m
5. Service Life: 6-8 Years
6. Certs: CCS, BV, ISO, RS, ABS, Etc
Structure of pneumatic rubber lifting inflatable marine airbags
Please the picture 1 of Florescence inflatable rubber airbag structure . It is composed by airbag body and terminal iron part. The airbag body is composed by natural rubber and strength fiber material through vulcanization processing; The terminal iron part is made of cast iron, it is combined closely with the bag body; One end is for pulling when move the airbag, and the other end is for charging and discharging the air. All the fittings in picture 2 and 3 will be supplied with airbags for free.
Materials
An airbag is to be constructed of an outer rubber layer, one or
more synthetic-tyre-cord layers, and an inner rubber layer. The
arrangement of synthetic-tyre-cord reinforcement layers is shown in
the picture below, all materials shall be vulcanized firmly.
| Size Range:(airbag size depends on ship size) | |
| Diameter(D) : | From 0.6m to 2.8m |
| Effective Length(EL) : | From 5.0m to 28.0m |
| Total Length(TL) : | From 7.0m to 31.0m |
| Standard Number of Layers: | Usually 3-12 layers |
