Home Companies Juvi Marine Machinery Co.,LTD

92mm Marine Anchor Windlass

Juvi Marine Machinery Co.,LTD
Active Member

Contact Us

[China] country

Address: Xinke International Building Liangjiang New Area,Chongqing .China

Contact name:Judy Chen

Inquir Now

Juvi Marine Machinery Co.,LTD

92mm Marine Anchor Windlass

Country/Region china
City & Province chongqing chongqing
Categories Anchors
InquireNow

Product Details

Marine Anchor Windlass Electric Hydraulic Diesel Hand U2 U3 Chain 

 

 

Specification

 

Main specification and parameter for electric hydraulic windlass
Chain DiaWorking LoadAnchor SpeedTowing ForceTowing SpeedMotor Power
19mm15.3KN≥9m/min15KN≥12m/min7.5KW
28mm33.3KN25KN15KW
38mm61.4KN50KN30KW
56mm133.3KN80KN≥15m/min40KW
76mm245.5KN147KN60KW
92mm402.2KN200KN115KW
105mm523.7KN250KN145KW
132mm827.64KN300KN

250KW

 

 

Windlass requirements

 

The windlass is a machine for lifting and dropping anchors, and it is also used as a stranding cable. Our country has the following requirements for windlass:

 

1) The windlass should be driven by independent motive power

 

2) The rated pulling force of the windlass should not be less than 41.68d2N (4.25d2kgf), when d<25mm, the rated pulling force should not be less than 36.8d2N (3.75d2dgf), d is the chain diameter, and the unit is mm. The average speed of the winch anchor when using the rated tension should not be less than 9m/min.

 

3) The windlass should be able to work continuously for 30 minutes under the rated tension and rated speed, and should be able to work continuously for 2 minutes under the action of an overload tension not less than 1.5 times the rated tension; in addition, the windlass should also be equipped with an overload protection device. Can be turned to medium speed operation.

 

4) The brake device on the windlass sprocket should work reliably and can brake the pulling force of 45% of the anchor chain breaking load (when the free anchoring speed reaches 5~7.5m/s, there is still a suburb to stop the slid anchor Chain); A clutch should be provided between the sprocket of the windlass and the load shaft; the brake and clutch should be easy and reliable to operate; when the windlass is running, it should be able to rotate backwards and be stable and fast.

 

5) The installation of the windlass should ensure that the three eyes (chain cylinder, chain brake, and sprocket) are in a line when the chain is drawn out.

 

There are two types of windlasses, horizontal and vertical, and horizontal windlasses are generally used on merchant ships. The vertical windlass is also called a capstan, and its power part is set under the deck to save the deck area. The vertical windlass is mostly used on warships. In recent large ships, because the size of the windlass is too large, the bow deck is difficult to accommodate, and it is unfavorable for operation, so some vertical windlass are also used.

 

A device that drives the drum and winds the rope to complete the traction work by manpower or mechanical power.

Coaxial winch: (also called mini winch) The motor and the wire rope are on the same drive shaft, which is light and compact, saving space (its tonnage includes 200 kg, 250 kg, 300 kg, 500 kg, 750 kg, 1000 kg, etc.).

 

Hot Products

BV Ship Vessel Yacht Electric Boat 40mm U2 92KN Marine Electric Anchor Windlass Data Sheet of Marine ...
Ship Vessel Warping Head 2 Gypsies/Chain Wheel Marine Anchor Windlass Electric Anchor Windlass Data ...
Drum Anchor Winch Marine Ship Vessel Boat Yacht Hydraulic Anchor Windlass ​ Data Sheet of Marine ...
Single Double Gypsies Chainwheel Windlass For Ship Boat 50KN 100KN 500KN Specification Model Chain ...
Marine Anchor Windlass Electric Hydraulic Diesel Hand U2 U3 Chain Specification Main specification ...
CXH-11P Single Deck Plastic Navigation Signal Light 60W Marine For 50m Ship Specification Internatio...