Digital auto balance meter.

The basic function
Basic functions:
It can be connected to a number of digital sensors.
Automatic/semi-automatic/manual corner correction.
Digital sensor communication address modification function.
A single sensor data view function.
2. Automatic switching between the two parts;
The nonlinear correction function and calibration error correction function.
The function of time shutdown.
To record storage/check/delete/power off protection.
It is equipped with rs-232crs485 communication port.
It is equipped with a large screen communication port; Equipped with standard parallel printing interface.
It can store 1000 sets of vehicle number and tare weight, 201 group of goods, can store 1001 group weighing records.
Can backup and restore various parameters in the instrument, reliable and practical.
Technical parameters
Technical parameters:
Digital sensor connection.
Connection mode: RS485 and 46-wire compatible.
Communication distance: about 1000 meters.
Number of connections: 1 ~ 16.
Sensor communication protocol: Shanghai yaohua.
Sensor power supply: DC 10V, 0.8a (Max)
According to
Display mode: new VBN liquid crystal display.
Clock: real-time clock, automatic leap year, leap month, not affected by power failure.
Large screen interface
Signal: 20mA current loop, serial output.
Baud rate: 600, transmission distance: no more than 2000 meters.
Print interface
It can be connected to a wide line printer: lq-300k, kx-p1131, kx-p1121, and DS-300.
Heat sensitivity micro type: POS58, T58D can be matched with the panel.
Serial communication interface
Standard configuration RS232C RS485.
Power supply: AC187 ~ 242V; 49 ~ 51 hz
Power supply: 12V battery power supply (external)