Digital auto balance meter.

Stainless steel case
Using the cortexa8 framework industrial-level main processor, based on the android embedded operating system development, human-machine interface is friendly and easy to use.
Use touch screen/key double input, easy to operate.
Chinese operation interface, maintenance, easy to use.
4 USB Host, support USB2.0 protocol, can connect U disk, PC keyboard, mouse, barcode gun and other peripherals.
It provides digital communication waveform display, visual detection communication status.
It can store as many as 20,000 weighing records.
It supports a variety of anti-cheating measures.
Support standard yaohua expansion module.
Support the Internet of things.
It has many diagnostic methods and simple debugging.
It can choose Ethernet, 4 ~ 20mA, switch volume and other extension interfaces.
It can be stored and printed in full Chinese license plate number.
The basic function
It can be connected to a number of digital sensors.
Automatic/semi-automatic/manual corner correction.
Digital sensor communication address modification function.
A single sensor data view function.
2. Automatic switching between the two parts;
The nonlinear correction function and calibration error correction function.
The function of time shutdown.
It is equipped with two independent full-duplex UART, which can be used for connecting computers, PLC and other equipment, and can be selected for various communication modes.
It is equipped with a large screen communication port; Equipped with standard parallel printing interface.
To record storage/check/delete/power off protection.
Can backup and restore various parameters in the instrument, reliable and practical.
Technical parameters
Digital sensor connection.
Connection mode: RS485 and 46-wire compatible.
Communication distance: about 1000 meters.
Number of connections: 1 ~ 16.
Sensor communication protocol: Shanghai yaohua.
Sensor power supply: DC 10V, 0.8a (Max)
According to
Display mode: 8-inch TFT industrial screen, resolution 800 x 600.
Clock: real-time clock, automatic leap year, leap month, not affected by power failure.
Large screen interface
Signal: 20mA current loop, serial output, transmission distance: less than or equal to 2000 meters.
Print interface
It can be connected to a wide line printer: lq-300k, kx-p1131, kx-p1121, and DS-300.
The heat sensitivity of the micro: POS58, T58D.
Serial communication interface
Standard configuration: 1. RS232/RS485 adaptive; 2, RS232
Power supply:
Communication power: AC187 ~ 242V, 49 ~ 51HZ.
Dc power supply: external 12V battery power supply.