Active Member
|
[China]
Address: No.11,Min Fu Road ,ShaJing Town , Bao'an District ,Shenzhen City -518103,P.,R,CHINA
Contact name:peter.huang
Shenzhen Leadsmt Technology Co.,Ltd |
|
|
Lamp Cap punching and Pinning Machine
1.Functions of this Machine
This machine is use to Pin the spikes to the lamp from the bottom and then punching the holes around the lamp cap ,after finished the above the two steps will give power to the lamp for testing .
So this machine is 3 in 1 functions , including Pinning spikes ,punching and testing .
2.One machine only can do one type of pin materials , Please notice us your pin materials is Steel pins or Aluminum pins or Cooper pins .
3.The Machine punching Function is compatible for E27 and B22 ,but the pinning spikes function only for one type of lamp cap , E27 lamp cap only suitable for E27 pins can not compatible for B22 .
Specifications :
| Pin Material type | Steel pins or Aluminum pins or cooper pins .One machine Only support one type of material . |
| Riveting and punching speed | 60-70 pieces /minute |
| Lamp cap punching type | E27 and B22 or E14 . |
| Riveting type and testing type | E27 or B22 or E14 |
| Air pressure | 0.4-0.6Mpa/4-6kgf/cm2 |
| Power supply | Single phase 220V,50/60Hz,90W |
| Machine dimensions | L750XW500XH750mm |
| Machine Weight | (about)61kgs |
| Packing Details | About 90kgs,L80*W80*H75(CM) |
| Calculation Function | The machine will automatic calculate how many lamps already production from the beginning to end . |
