SUZHOU HYUNVAN CNC MACHINERY CO.,LTD. |
|
High Performance Color 20W Fiber Laser Marking Machine For Metal ,
Bearing
Product Features:
1. Maintenance free,for long-term consideration, the cost is much
lower than other laser marking machine, save equipment
and worker cost.
2. High speed, 2-3 times over than traditional diode pumped marking
machine.
3. Using advancesd laser module(Raycus or IPG brand), the life time
can up 100000 hours.
4. With red light positioning device, more accurate and reduce
positioning time.
5. Perfect performance, 24 hours continuous working ability.
6. Simple and convenient operation, easy to learn and operate.
7. Compatible AutoCAD,Corel Draw,Photoshop and etc, support
bmp,jpg,gif,tga,png,tif,ai,dxf,
dst,plt formats file.
Technical Parameters
Laser power | 20W / 30W / 50W |
Laser wavelength | 1064nm |
Laser type | Fiber Laser |
Laser beam quality | M2:1.5 |
Repeat Frequency | 20KHz-80KHz |
Repeat Positioning Accuracy | 0.005mm |
Min linear width | 0.01mm |
Marking Depth | 0.01-0.5mm |
Standard Marking Area | 110×110mm |
Optional Marking Area | 70×70mm/175×175mm |
Rated Power Consumption | less 500W |
Operating Voltage | 220V/50Hz/15A |
Graphic formate supported | PLT, BMP, JPG, PNG, TIP, PCX, TGA, ICO. DXF,etc |
Working temperature | 5-35 centigrade |
Cooling | Air Cooling |
Machine Details:
Applications:
Morn Fiber laser marking series machine is widely used in metal and
non-metal fields,such as automatic parts industry, medical
equipment, electronic components, IT industry, hardware industry,
precision apparatuses, jewelry, crafts, high-low-boltage
appliances, packaging indstry,etc.
Installation environment requirements
1. Prevent vibration: The optical path of the laser marking machine
is very precise, so the working environment must be stable. If the
working environment is vibrating, the optical path of the laser
marking machine will change, and the effect of the laser will be
directly affected!
2. Reduce dust: Because there are many optical components and
precise electronic components inside the laser equipment, it is
necessary to prevent dust from being adsorbed on the laser and
those optical lenses, which has an impact on the quality of the
light.
3. Voltage standard: The voltage of the laser welding machine must
be in strict accordance with national standards, and the voltage
should not have large fluctuations. If voltage fluctuations are
recommended to install a voltage regulator, the working environment
is recommended to stay away from high-powered equipment.
4. Good grounding: Only correct and good grounding can make it work
properly. The laser power supply and welding control system are all
digitally controlled by industrial microprocessors. Only good
grounding can ensure their normal and stable operation.