10w 20w 30w 50w Fiber Laser Marking Machine Jewelry Brass Engraving Cutting

10w 20w 30w 50w Fiber Laser Marking Machine Jewelry Brass Engraving Cutting

Mini type, in small size, no need to take much floor room, also can save air freight for customers.
• Main feature is with protective cover on whole machine, very safe and human, can protect workers from the laser. Popular among market.

Application:
• Mini type fiber laser marking machine for a wide range of application, mainly for all kinds of metal and most plastic.

• Especially suitable for hardware tools, kitchenware knifes, plastic products, metal jewelry, buttons, integrate circuits, frames, plumbing fittings and other products marking. Clear, beautiful and permanent marking.

• Technical Parameters

  Laser Source	IPG, Germany brand
  	Raycus, best brand in China
  Output Power	10w/20w/30w/50w
  Wavelength	1064nm
  Beam Quality	<2
  Repeat Frequency	10khz— 100khz
  Pulse Energy	2mJ
  Beam Divergence	-0.3 to +0.3mrad
  Laser Class	I
  Resolution	18μ
  Repeatablility	50μ
  Marking Scope	110mmx 110mm/ 175mmx 175mm (optional 200*200mm, 300*300mm)
  Linear Speed	800 character/ s
  Marking Linear Speed	≤12,000mm/s
  Marking Depth	Max. 1.0- 1.5mm (hard steel)
  Min. Line Width	0.012mm
  Min. Character Size	0.15mm
  Repeat Accuracy	±0.003mm
  Input Power	0.5kw
  Electrical Source	220V / Single-Phase Circuit / 50/60Hz /4A

Application:

Rotary Marking Stainless Steel

From paint thickness gauges and microscope dials to sensor bodies and containers, laser marking is fast becoming the standard method in many industries. High quality crisp text and graphics are possible (text down to 0.6mm high) with better durability than ink and paint applied processes

Anodised Aluminium Gauges

Anodised aluminium has excellent product finish and also provides an ideal medium for laser marking. Crisp clear marking with extremely good contrast makes the text and graduations very easy to read. Laser marking allows very fine lines to be produced, like those needed on the vernier scale shown.

Plastic Parts

Many types of plastic can be laser marked which has the advantage of being a permanent mark that cannot wear off, unlike paint and ink applied processes. This is especially important in medical applications (the lower part) where the identification codes need to be permanent and have no toxic effect.

Medical Assembly

All parts of this surgical trocar assembly (steel and plastic) are laser marked with sizes, part numbers, batch codes and the manufacturer's logo. As these are re-usable items that will go through many sterilisation cycles, it is important that the mark is highly resistant to wear.

Clean Surface Plate

This laser cut stainless steel control panel operates in a hostile environment, so the text and graphics must be able to withstand this. This is achieved by laser marking as the surface of the material is permanently changed by the process. This is unlike ink and paint applied processes where the information can be worn or dissolved away.

Dash Board Panels

A relatively cheap option for consoles and panels is to use aluminium. These can be anodised in a wide range of colours and laser marked with text and graphics. This method gives excellent aesthetic results and weighs considerably less than a steel alternative. HYUNVAN LASER can laser cut the material to shape prior to marking.

Packing Details:

• Water-proof plastic film package with foam protection in each corner
• Solid Seaworthy Wood Box Package with Steel Belt
• Save space as much as possible for container loading